Recent content by ssb1923

There is no place for setting. Positive and negative pressure adjustment is made by adjusting the height of the subtanks. If I can increase the power of the air pump from the system parameters, my problem will be solved, but where to do it?

hello, i have a different problem today Some nozzles are lost during printing. After trying many different things I realized that it was due to air pressure and because positive pressure didn't work, it made air under heavy pressure. When I open it with service mode and try the pressure pump...

I don't think it's the temperature. ambient temperature is stable. We have been printing under the same conditions for a long time and it has started for the last week.

I will try with canvas and paper tomorrow. I will also check the rails and the cleanliness of the table as you said.

İt is missing ink. I tried with different colored materials. I'm sure the materials are clean too. the result was the same

Machine does not have white ink. I cleaned the heads and caps with solvents. I reviewed the Droppos settings. The service was also unable to resolve the source of the problem.

Hello I have Mimaki SWJ320EA Solvent printing machine. We do not have any nozzle loss. In the last week, white spots started to appear on the print as seen in the photo. I have the same problem with different designs. I tried many things like cleaning but the problem is not solved. If anyone...

I called my dealer, they said they will install new firmware. I will write for information after installing the new firmware. Thank you

Hello I own the Mimaki Ujv100-160 printer. My problem is that the printer turns on and refreshes every 6 minutes. It doesn't give any error message but it repeats this every 6 minutes. There is no anomaly in the settings. Refresh every 4 hours, cleaning every 12 hours in the settings. Does...