Recent content by swarnes

Hi, On CM4 on illustrator - get printer margin - it keeps value at zero How do I use it correctly?

Ok I just tried clicking the edge of the shape and offset path it does not work can I send you the file to look please?

I have attached issue that they are all clipped in group so I can't do offset path on outside path

Hi A designer has made a graphic and saved as pdf from photoshop It shows as a clipped group and all are masked within the group It shows the layers and paths but it won't let me offset path I'm struggling to make cut lines, how do I convert the pdf to ai?

Hi all! I was having good pop-out cuts, now I changed blade, and cant get it right again, Ive tried everything probably used half a roll of vinyl trying to get it right. Squares especially are not square and have those niks in the corners. Can I remove the strip seeing as I will only do...

Thanks - attached - When importing graphics from Graphtec Studio there is not this issue, so some problem with file setting in Illustrator. I cannot attach EPS I have uploaded to a file sharing site. https://easyupload.io/q760yw

Hi, The Eps files from AI are printing with the cutline colour then cutting 2x with only one cut line, how to fix please?

Latest version of VW

If i did it like this would it cut the contours again?

Hi, I saw on another thread about Versaworks cutting contours first, then the perf cut as second step, I cannot seem to be able to do this, any advise on it please? I'd like to cut all the contours first, then the perf cut second, Every setting I have tested, it cuts the contour, cuts the perf...

I think the main reason is that I was not adding 90mmfor thr sensor so it was mis-aligning on this step. I'm not sure how to program extra sensor so I won't do that I guess. Thanks for the suggestions mate

Hi, Sorry for the multiple threads, its just important and I cannot figure it out. I would like to in order; 1. Contour cut. 2. Cut Image boundaries with perfcut. Currently the machine will cut a contour, then the boundaries then move onto the next. I would like to do all the contour cut...

Than you, I would also like to print on 1200x1200 DPI I set up a custom profile, but the colours are way off, any suggestion how to unlock 1200x1200 dpi on Roland SG2-300 please? :) Didn't want to keep spamming threads.

I just wanted to add to this, CE7000 Graphtec Plotter and I’ve been cutting with it and my media moves while cutting because it only has 2 push rollers. Was wondering if you can add another one to this newer model? Anyone have any advice? or should I sell it?

Thanks for the reply, these ones on the ebay link are adhesive backed, so if I order 1mm thick, the correct width and then the length of the current strip?