Recent content by Sylvia

Thanks so much for trying to help! We just put in a cleaning cartridge and pulled the cleaning fluid through the cyan line. Hoping to soak it overnight, then put the cyan back, and pull the ink back with a syringe. Will try your suggestions tomorrow when blue is back in the line.

Hi Guys, Wondering if someone has had this problem and found a solution. Any help and suggestion is much appreciated. We run an old Roland VS540 (looking at replacing it, but that's another post!) I would just love to get though the next month or so, so we can figure out what to buy in the...

Talking them out of it is the answer! Thanks for reassuring me. We have put Orafol 551 decals on powdercoated signs without any issues in the past - I guess our powder-coater guy uses the right stuff , so no issues with sticking :-)

I think they are afraid of vandalism - people picking off the little dots that form the decal work. Yes, what you guys are saying makes total sense, I was afraid of cracked edges as well. Thanks so much for your advise!

I was asked to clear coat a powder coated aluminium sign, which has Orafol 551 decals on it. What would you guys usually use for clear coating this? I looked at posts, there is always the general term, "clear coat" but what is the actual coating material? Thanks heaps!

I would love to check out your spreadsheet, but get his error messge: This item might not exist or is no longer available

Thanks for your suggestions, we will go ahead with a horizontal join and just butt joining factory edges of the panels instead of double cutting. The join will be at the level where the safety strip is on the inside. So not invisible, but still hidden a bit. Much appreciated your input!

Thanks for trying to help! Here is our method of applying: After detailed cleaning of the window, we reverse roll the film, separate the top 5”, while spraying it with baby shampoo + water solution. Spray the entire window except the top few inches, where the film is wet already. Apply the film...

Hello Guys, We mainly do decorative window films (frosted, printed optically clear, contour cut, etc) and large wall installations. Have done some smaller anti graffiti film here and there, but now we have been asked to do an entire building, with many windows being 2.4m (8') high by2.1m (7')...

problem solved, sorry - just cant delete the thread...

Hi Guys, Wondering if anybody has been using a color profile for wall textile other than Photo-tex's own? Here is our issue: We are printing a large wallpaper of a mainly black and white tone photograph of an artist's painting. (60 feet x 20 feet) There are extreme dark and light areas within...

We have had this problem on an off with a Roland 540. Went thought he hole lot: cleaning, different medias, temperature settings,colour profiles, even got a new head. Nothing. Just a week ago (I think!) we found the 2 or 3 problems: 1.) If we are not using the printer A LOT, occasionally we...

Thank you!

Thanks so much for all of your ideas. Here is what happened: encoder strip and print head has been cleaned already. We tried double path, still stripes (plus we are also getting almost like a moire effect. Tried uni direction, maybe a bit better, but still stripes. Tried two other profiles...

Thank you for trying to help. I'm using an rgb file from illustrator. Converted into and eps. It is a single pink rectangle. nothing else. There is nothing wrong with the actual color, I can match what I need to very very close. But it's not consistent in the print.