I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I finally got it working today! Ended up needing to carefully force ink into each of the printheads with a syringe just to make sure there was a nice curtain flowing in each channel. Then sucked/purged all the dampers and ran the cleaning cycle. Had to load ink and clean a few more times to...
Here's an example of what I'm struggling with now. You can watch from 6:50 on. Basically I am flash jetting a brand new xp600 head with UV cleaner. Then I add brand new white ink and the ink almost entirely quits flowing. Could be a bad head, bad ink, bad software setup or other voodoo...
Actually "technical knowledge about the way heads work" is exactly what I'm looking for. Where do I research that? I may never attempt a head swap but at least knowing how each head works and how it compares to the others would be helpful. For Instagram I just learned that the Ricoh heads...
I'm currently messaging the manufacturer and all the electronics and voltages look good. Printheads arrived in the mail last week. Was even printing 2 days ago. Took forever to get the white ink flowing. Replaced the white head today and no white flowing. Then I check the color and it's...
Thank you very much for replying! Are the xp600s just too breakable? Why aren't they considered for commercial work? I wish I had known that before I purchased. Do you know what heads are the most forgiving and robust in dealing with bad ink etc? I find there are so many things that can go...
I guess I should clarify. I'd like to learn all I can about xp600 heads and how they work and the components that make them work on various machines. If there is some sort of training program or education I could seek out (paid is fine)? I'd really like to learn what I need to revive this...
Hi guys. I have lurked here for a long time and researched probably almost everything there is online concerning xp600 printheads. I made the mistake of buying a Chinese UV Flatbed not realizing what I was getting myself into. It's has 3 xp600 printheads (CMYK, W & V). I cannot get them to...
Hi guys. Selling my UV Flatbed printer from NTEK (Chinese company). They are helpful at troubleshooting problems. Just have to message them on WeChat during the night hours and use the translate feature.
Machine is not even a year old. It has White, CMYK, and Varnish heads (Epson XP 600)...
I use them and have had all sorts of issues. Don't let them sit. Make sure you run the machine or clean them daily. Also don't trust the cheap replacement heads. They are just recycled heads from somebody else. Good luck!
I'm going to give this stuff a try:
CRC Urethane Seal Coat Viscous Liquid Coating, 250 Degree F Maximum Temperature, 11 oz Aerosol Can, Clear - 18411 https://a.co/d/dYvPtFk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.