Recent content by Witer

I noticed the same, 2 print heads should be faster. However it seems that mimaki JV is slower then Roland with one print head.

Can you post photo where it was exactly...?

Have you solve this issue..?

Thanks, do you have any doc how to do it...? In my case, in user mode when I print correction pattern for 1200x1200dpi resolution the first row and second is print with 10-15cm distance....

And does anyone have service manual for mimaki jv100-160? How to enter to service mode of this printer...?

Can someone post printed pattern of dot positioning for 1200x1200dpi resolution...? I have 3.4 firmware and for this resolution lines are not overprint each other... Ther is huge distance between tow rows of lines...

Hi, could you be so kind and post picture of print pattern of dot position for 1200x1200dpi resolution... I have strange situation that lines are not overprint but between 2 patterns are huge distance... My firmware version is 3.4.

The correction was done for each resolution. So it should be ok. But it was not. How can I test such phenomenon...? What and how to print to see what can cause that picture with higher resolution is blury...

Tkanks guys for help...

Hi, Van anyone explain Joe ktoś with resolution dpi printing on mimaki jv100. When i choose 720dpi picture is ok... but the same picture is blury when i specify 1200dpi... Ho ot possibile?

Hi, Can you advise please how to test new plotter before purchase....? What and how to print to see if plotter id doing good job...? thanks

Hi, I am going to purchase Mutoh XpertJet 1641SR... Can you share opinion about it? did you have any issue with this printer? I had RF-640 and it was disaster... thanks in advance for your feedback

Additionally I wanted to point out how the feeding adjutments looks on this paper. There is no clear enough clearance between columns. please see below photos: https://drive.google.com/file/d/1PO4ZH4FZqm9Y8e8uEFFaLzAlt9Pn6mwU/view?usp=sharing...

Well, today I made default calibration of feeding with my paper. The strange was that default vale was +0.3% in the service menu. I used different media paper and foil and with 6 pass I have this vertical bands. But with 8 pass it is significantly reduced however it is still present. In my...

photos https://drive.google.com/file/d/1KGkmsN-SOqLge_4wk_onMMvfHHrjz0_q/view?usp=sharing https://drive.google.com/file/d/1V6hPqqpJiS_1o-y3BbexzG-OTsgDlz-c/view?usp=sharing https://drive.google.com/file/d/1LsAuvJyz2HrxUAJjhxgBu1FTfyttccfW/view?usp=sharing