Search results

I bought some printers vj1204, vj1304 and vj1614 mutoh from the united kingdom which have 220 plug ends. where i live use 110 plug. Would i have to install 220 volts or can i change the power cord and it will work? Would i have to change the power board on the machines?

I have a vinyl express Q130 cutter and i had reset it, but now i can't find the ARMS menu. When i press he ARMS button i am getting axis point 1. How do i change it back so it can auto read the marks?

HI i was printing on my vj1204 and then the printer stop and give me error 86 head ovp. The manual say it is a abnormal condition in head driver. I change the cables and it still give the error. Printer is about a year old, good nozzle test. what could be the cause?

I have a vj 1204 and when i send a job it say warming up but it doesn't start printing . I would have to start it by pressing the menu key and enter. What can cause this and how to fix it?

i have a new mainboard for the roland SC-545EX printer sojet 2 v. What i have to do to get it install as the other board is burned out.

Hi i am looking for a heater control board for a vj1204. I am getting a 079 err commu. Was told it could be the board.. any other ideas?

Can something tell me how to change the dampers on a vj1324? i am trying to get the ink pull down to the dampers, i try pulling with a y connection but it have pressure but no ink is coming. Any help?

i buy a vj1324 and it didn't come with a waste tank and when i turn on the printing it is saying full waste tank. is there a way i can by pass it? and use a normal bottle or do i have to buy a waste bottle. if so where can i buy it from?

can anyone help me for the cables for the vinyl express q130 plotter. The cables that go from the control panel to the main board also the cable from the main board to the head board.

I have a vj1204 printer, it was printing and it shut down by it shelf. when i press the power button it isn't coming on. The day before i was getting a 079 err commu error and i took out the memory and re seat it and it came on and i printed then this happen. Any idea on what caused it and how...

I have a vinyl express Q130 plotter , not sure which model graphtec it is. I would contour cut with it good but this time is giving me a mark scan error and it is going over the first mark but not picking it up. I reset the plotter and now when i press the axis bottom is it giving me a axis...

I am getting a fuzzy lines with any blue or black print. I was told the CR cables or the printhead is failing. Any ideas?

I am trying to get the headrank code on my vj1204 printhead. I can't see some of the numbers or letters. I am putting back in the head as i had it soaking. Can i put it back in without putting in the code? I was using another head so i soak the head i am trying to put back in.

When i send something to cut these numbers and letters cut on the material. Any ideas on the problem?

Have anyone buy the maintenance station from digi print supplies for the vj1204? I have and when i install it, and push the printhead to go on the station it is very hard to. When i turn on the machine it is giving me a error 074 cr2 current . When i pull the head out and turn on the machine it...

HI Do anyone know where i can but the sponge for the mist pad on the vj1204. Not the black part also. If i only sell as one complete part is other machine that only sell the sponge that i can use in replacement?

My vj1204 is missing nozzle in my black. How can i get it back? I was thinking it can be the cap top not sitting good but the other colours is good. What i should do?

I am getting this error on vj1204 printer err85 head overheat. What can cause this and how do i get it removed? Also it is a new head.

i was printing a job and it was missing yellow, so i did a nozzle test and one channel of yellow didn't print. so i check the damper and it was empty so i pull with the syringe and it came into the damper, set back up and it clean now all the colours are missing. I did cleans and still nothing...

when i send a job it is printing a black line at the beginning and the end of the image. Also the print head is moving the full width of the media, how can i get it to just print where the image is?