Search results

Please know I tried to find a history for this and could not. I have emailed Fred to ask what I am doing wrong in search mode, but I kinda need an answer quickly. Any guidance is appreciated. I went to a new customers site, he wants some new signage to replace his old signage (obviously). I...

Once I load the media and hit F1, the carrier reads the 2 rollers but then goes to the left and stops and won't stop feeding the material. Sometimes it will go back to the right but it will do the same thing in that position as well. Any advice?

I use a high tack banner tape but still keep getting bubbles. I made a banner yesterday morning and then saw it last night and the sides were all bubbled. It looked crappy, argh! Seeing this made me think of heat welding. I went on you tube to see what it is and it doesn't seem like the...

Hello, I have a Mutoh Valuejet 1604, 54". When the material is feeding thru it is jumping, skipping every 3 seconds. This occurs when I manually feed material thru and worst of all when I am printing. When I say manually feeding, ya know pushing the forward button. It takes a little while...

I am wanting to offer custom flags for my customers. But after I tell them the price, I get the "I can get it on the internet for 100 bucks". I of course tell them that price is not for a custom flag of the same quality. I have a company that I can use but no matter what they want to charge...

Trying to find a vendor in California that has blank pre-cut 10 mil coffin shaped arrow signs. I know Sign-Mart has them, but does anybody else?

I am using Oracal 1" double sided banner tape. Unless there is some formula to folding the banner over that I am not aware of, the fold does not adhere. It will stick for a short while, but I made a banner yesterday at 3pm, I came in this morning and sure enough the fold was bubbly. Any...

I had a potential customer come in today and ask how much for 100 postcards. I gave her my pricing, which I think is fair. She told me about another quote she received for 100 postcards and it was half the cost of mine. I have been on 4over seeing what I can do to get my price down to theirs...

I have been getting emails regarding the illuminated car magnetics. Has anybody actually purchased this product? If so what do you think? /www.fireflydisplays.com/starterkit/starterkit2.htm?oid=1006_9

I have a cutomer that wants to mount a 3' x 8' of gator to a wall. They want it to stand off of the wall about an inch. I understand I will need 1" gator for this but my question is......how to I affix it to the wall? I see this everywhere and have even done it at my house but I used silicon...

I understand it is not kosher to share vehicle templates and completely agree. But I am wondering if anybody knows if there is somewhere that I can purchase just one vehicle template? I just need the door. Thanks

Hello I am looking for someone that does HDU signs. Can anybody recommend someone? Thanks

I have a customer wanting window clings but she wants the window clings to go on the inside of the window. I have a line on clings for the outside but not for the inside. Is there someone out there who can do these? Any help is appreciated.

I have a customer in need of new signage for his tradeshow booth. He tells me they are somewhat rigid, I am thinking a lexan type of material. I would appreciate some advice on what type of material I could use, is a matte banner totally out of the question? Is that cheezey? I hate to order...

I am wondering if I can lay 1/4" acrylic with silicon on a curved wall and not worry about a stud mount? The capital letter is 24" with the others around 12". Any advice would be appreciated, thank you.

Hello, I have a customer that is wanting rigid, reusable signs. They are going to put them on easy ups, approx 18" x 10'. They will have new sponsors every year but want to reuse what they order this year. Any suggestions would be appreciated.

Hello, I am having some issues with my plotter. It is reading registration marks and aligning on the first few cuts then it makes some kind of gutteral sound and starts cutting in the wrong spots, about an inch below where it is supposed to. I ran it a few times through and it would do a...

Hello~ Is there anyway to use the Wasatch program to just cut vinyl without going through the printer? Like my Graphtec Cutting Pro FC1400-75? The FC1400-75 is down right now and it seems tedious to have to run white vinyl through the printer and then the plotter. Any advice is appericiated...

We have relocated our shop to one of the busier intersections in our town, extremely high visibility. We have made 2 banners 52" x 96" with a nice pvc frame to go along with it. Well the first day my guy put it out at 8:30 and by the time I rolled in at 8:40 the banner was stripped from the...

Hello, I am having an issue with a customers logo. It is a 24" x 36" real estate sign. Some of the artwork is falling off of the sign and I can't remove it or I lose a large aspect of the sign. I can only print to 52" and with this portion of the logo overlaping I cannot seem to figure out...