Search results

the shiny bronze matal broke one side , in my case i put a hard metal strip , pass it through and hold it well, save the part money, yeap , true checked on the wiper became harden over time , the ink will depost and hard on the mist will cause damage to head, wipers need to be changed often to...

it 's suppose to be quite no more flappy sound, just did it

i just fixed mine, put new wipers from a chinese aliexprss store, they come in 20 pieces, soft and i put on, tighten the belt, play around tighten the belt , but no too tight , will damage the motor, try cut down a bit of the wiper if necessary, dip it with solution will work

i did buy soft ones from sign in china 20 of them, it's still the same, just flappy fighting on the scraper, obviously it's got strong force trying to come out, the scraper just stopped it, but going in is fine

same problem here, also ordered parts with digitprint , almost the same play, checked out everything, tension with belt and gear , it's pulling tight, and rolling. The wipers just wouldn't pass the scraper, evening fighting to come out hard with floppy noises, maybe should go back to oem wipers...

changed new wiper scrapper and new wiper still the same, the belt and gear looks fine, belt did not seem to skip gear or grinding, the motor should not pulling so hard for the wiper to come out with such strong force against the scraper, the scraper is film like plastic , could bend , please...

Thanks a lot , I noticed the wipers were hitting hard on the wiper scraper with strong force and tried to come out ,but just wouldn't pass the scraper, It's travelling, but the scraper stopped it , but the scraper is floppy and not stuck if flip backward

did you fix it, How did u fix it

i could send you 3.2 in exchange, do you have other versions too

do you have other version files under 2.5, could tell u how to upgrade

Do you have the firmware file version 2,1. i could send you 3.0 or 3.2

hi. could i ask for the firmware you have 2.10. thanks. i have other ones

Anyone has CuttingMaster3_CC7x64.aip, please email me, signtech@shaw.ca, Try to use with AI 2015 , 2017, 2018 Thanks,

Hi, Could you please send me that info ,CuttingMaster3_CC7x64.aip also? I would really appreciate it. My email :signtech@shaw.ca Thanks!

Hello. Everyone. Now I am still in the long road to fix my machine. I hope anyone could help out here. Thank you. I need the newer Versions to slove the issues. Maybe 3.0 . 3.1 .and up and the tool. Thank you. Please email me signtech@shaw. Thanks

Hi. Do you have the firmware 3.1. My machine is Cjv30 160. It has some issues. Need to be upgrade. Could you send me . signtech@shaw.ca Thank you. Much appreciated

do u want to sell it

hello,cjv 30-130, should i adjust the motor , when the machine come to the cappaing station, seems it needs to travel a bit more so the head is entirely covered by the cap. A lot of times it hit the cap and not sit fully and right away throw me error code 07. I have to tilt the capping slider...

You could try a new print head on,Change the memory board and memory cable , slidering board. will work, email me , signtech@shaw.ca

you need to change the slider board