• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. mimaki cjv30 error 202 device construction and print head not firing at all

    HEllo, Could i ask where you could get the new slider board and ffc cable and the price, where to purchase a fair print head thanks

  3. Mimaki CJV30 Firmeware needed!!!

    Hello Everyone, I am looking for the old firmware for my CJV30-130, below 2.0. Anything will help. 1.2 or earliest. My email signtech@shaw.ca much appreciated!

  4. mimaki cjv 30-130 mainboard problem

    MIMAKI cjv 30-130,recently , i removed mainboard from the machine. I have all the reading for tps (test points 1-8) one test point TP3 has reading 1, all other test points TP1,2,4,5,6,7,8 have reading between 17-18 kohms resistance, Anyone know what happen. Where should i check to, Thanks in...

  5. Mimaki Print Head refurb???

    hi, could i ask about your print head, is it in working condition, do you have email or app i could via ,,Or maybe a phone number, Currently I am looking for one used to test my machine,thanks my email, vancouvergraphic@shaw.ca

  6. Need Help Mimaki JV3 130sp flashing not booting up

    your transistor is not right, get it to eletronic store

  7. Need Help How to save my parameter file back to my computer for mimaki cjv 30-130

    I have now replaced the bad transitor, A1472 and c4520 Now if i power it up, sure it will give me error, for ffc , sliding board are disconnected,print head missing, But could i be fast enough to go to service mode or quickly to download my old board parameters files,,etc.. I fried the mainboard...
  8.

    please help for mimaki cjv 30 -130

    Thank You. Pitzu, I have done all the tps on the mainboard, From tp1 to tp 8. yet, I got one test print tp3 very low, It's like zero. 0.00. Others are in the range between 17kohm - 18kohms I haven't done any voltages check on mainboard or others. I believe the power board is still working. It...
  9.

    please help for mimaki cjv 30 -130

    Thank You. I have done all the tps on the mainboard, From tp1 to tp 8. yet, I got one test print tp3 very low, It's like zero. 0.00. Others are in the range between 17kohm - 18kohms I haven't done any voltages check on mainboard or others. I believe the power board is still working. It has...

  10. mimaki cjv 30-130 won't start up

    Thank You. I have done all the tps on the mainboard, From tp1 to tp 8. yet, I got one test print tp3 very low, It's like zero. 0.00. Others are in the range between 17kohm - 18kohms I haven't done any voltages check on mainboard or others. I believe the power board is still working. It has...
  11.

    please help for mimaki cjv 30 -130

    hi, i bought a mimaki cjv30-130 old,was working great for cutting ,but the print head is dry out. i try long time and finally got some test print out, then i took off the print head and clean it for a long time with strong pressure and solution and i knew i fried up the printhead board and even...

  12. mimaki cjv 30-130 won't start up

    hi i bought a mimaki cjv30-130 old,was working great for cutting ,but the print head is dry out. i try long time and finally got some test print out, then i took off the print head and clean it for a long time with strong pressure and solution and i knew i fried up the printhead board and even...

  13. CJV30 / JV33 Mainboard

    hi Adam. Could you tell me how to check the tp1-4. I have the same problems with my mimaki cjv 30. hi i bought a mimaki cjv30-130 old,was working great for cutting ,but the print head is dry out. i try long time and finally got some test print out, then i took off the print head and clean it...

  14. HElp for getting a mimaki cjv 30-130mainboard and slider board,

    looking for mamakicjv 30 mainboard and others, as well used or old print head for mimaki cjv 30-130.. used is fine. also need help to load parameter firmware, install, calibration..my boards fried up. I am in the lost. nothing was backed up..can anyone show me the direction..steps much...

  15. JV33 main board replacement

    hi guys, looks like i run into the same problem. i burn my mimaki cjv 30-130. looking for mainboard and more.. also no parameters and any other.. could you guys show some direction how to find the parts and change them correctly. Also may i ask for the firmware and other loading files.. Thanks

  16. Mimaki Jv3 Motherboard

    how did it go, yeap, i also found this company too HI, Thanks for your replying. ken I remember when i attached back the head and started , it booted and then immediately threw the error code 06. But only after I turn on and off button a few times, it went into comma except the green button...

  17. mimaki cjv 30-130 won't start up

    HI Everyone, I tried and tested the fuses (f13, read 0.09).. power board fuses . none of them reading 1. So I assume they are ok. Now I am coming up to buy an mainboard. Who know which one is the correct one to buy and how do i install it, also i didn't back up any parameters, no csv or any...

  18. mimaki cjv 30-130 won't start up

    HI, Thanks for your replying. ken I remember when i attached back the head and started , it booted and then immediately threw the error code 06. But only after I turn on and off button a few times, it went into comma except the green button shows green.. I looked for error code , says...

  19. mimaki cjv 30-130 won't start up

    Any help or suggestion Thanks

  20. JV33 Sudden Error 202 Device Construction

    hi i bought a mimaki cjv30-130 old,was working great.cutting ,but not the printing. The print head is dry out. i try long time and finally got some test print out, then i took off the print head and clean it for a long time with pressure and solution and i knew i blown it. I put it back after...

  21. JV33 Sudden Error 202 Device Construction

Top