Search results

I'm located in Greenville. I will message you thanks.

I did replace the head cables as well. Yes when I pulled ink through the dampers it would pull through like it should and sit there but when I push it back onto the head the ink flows backwards and starts to have air pockets.

What tells the nozzles to open to allow ink to come through?

Same results. No ink movement and no suction when pulling from in front of the pump.

Okay will try this now.

When I suction from the waste tubes I can hear a gurgling noise that sounds like it coming from the pump. I put some solution on top of the capping station and I can pull it through the pump just not the ink.

When i suctioned at the dampers I can pull ink and fill up the line and damper, but when I reattach the damper to the head the ink starts to flow backwards toward the cartridges and has air bubbles.

I have tried that but no ink will move and the suction will actually pull the syringe back in.

I have checked the F2 as well as the other 2 fuses that are nearby and they all checked out with a continuity meter. No I did not get any error codes. Printer is sitting there waiting to print but no matter what I do I can not get ink to flow through the lines.

I just have this feeling that it is some sort of fuse or something not letting the nozzles open in the printhead.

Haven't tried syringing from the cap. Haven't wanted to take the new maintenance system apart. But when I tried to syringe the old pump it would only suck air.

yes I can move ink above the dampers, and even below the dampers it just will not go through the head. This is a brand new printhead.

Thanks for the tips RG. However after putting on the new MS and the new printhead I can still can not get any ink to move in the lines when I do an ink charge. Everything sounds like it pumping good but no ink will move in the lines.

The MS is fairly old so I just ordered a new one. Will put it on tomorrow and see what happens. Thanks for the guidance. Will update tomorrow.

I will try this out. I started to think it may be a MS problem but wasn't sure. We originally had some clogged nozzle issues and after trying a head soak we noticed that this problem arose. So we went from lines in the print to not being able to print at all after a head soak. I even put on a...

My ValueJet 1204 has stopped printing anything. There is no ink movement in the lines when I do a cleaning or ink charge. I have checked the head fuse and it seemed to be fine. Anyone else have any suggestions on what to do next?

awesome Awesome man, thanks a lot. I can't seem to find it anywhere else. Tried buying it from that site, but it won't process my transaction.

impact I tried that, the W is too fat and the Y is wrong. Thanks for trying though.

Can't figure out this font to save my life. Any help would be greatly appreciated. Thanks in advance.

thanks man checked that out and its close but a little off. Gonna vectorize it all if I can't find it, thanks for your help tho.