Search results

If the printer is already running white and metallic the conversion will be difficult being you need to repalce ink lines, dampers,captops,printheads.

That encoder in the picture is done witht that amount of a scrape/rub theres no way for the sensor to read its position on the strip if it is no longer there. Did you do that by cleaning it? encoders are very sensitive strips of mylar 1 kink or rub off like that it is done. The rest of the...

I've changed hundreds of printheads.... but also am a certified printer technican. A versacamm uses 2 epson dx4 printheads.... without proper percuation you could damage the new head, burn up the carriage board or mainboard. BTW if and when you get it in can you do mechanical alignments for...

hey Tim I know its a old post but I cant help to see that you are a Roland dealer selling 3rd party ink?? That being said theres two comments saying that solaris ink is the best 3rd party ink. lol I have been to liquecolor in norman,ok lets just say not the cleanest ink company in the world Im...

OK.. I have seen this before. Try this re-install once you get printer connection verified go to edit > prefrences > on the update tab set it to your ink type and printer only. Do not run updates during install after you set that update setting do the updates then open it up see if that works.

btw... the dual channel cmyk works and you can increase your speeds drastically. That saying IDK if versaworks has any profiles for that on your model... BUT if you had the ability to make profiles it wouldn't be tough at all.

Wingace running the printer in 6color mode through versaworks and no metallics or white. Your right by running cleaning cartridges in those ink channels not used, its important or the printheads will dry out and be useless in the future. I dont really no the reason you dont run the met and...

I have the service manual for the Soljet II if you need it. If you were wanting it to help replace the dampers its not going to be a big help. On a roland it does have to be done carefully as so that you dont break the manifold nipple on the head or spit ink on too the electronic board of the...

In my opinion the XC-540 is a full metal jacket and the SC-545ex is a jacket with metal patched around it. 7yrs. of service on solvent printers of all sorts. The XC is belt driven were as the SC is cable driven, the XC has a dryer built on the front (big enough to print full speed and no...

Lets get it clear the CJ, and SC have a crop mark sensor. It doesnt have auto registration sensor" Hey Table you ever done a print/lam/cut on your CJ , if you have you know you have to set base point on first crop mark then hit align point the cutter head goes over and finds the next three...

If you want the parts PM me I can order those for you... I need a pic though .... PM me

the newest VW update works great, I think they finally got the adobe3 engine working properly and what issues I saw with PDF files and flexi eps. has been fixed. Roland is on there heals now they finally got it ..... I really cant believe it a printer manufacture made there own RIP and it...

1. I would not call the HP ink expensive its mearly cost effective, and they do great work for indoor use no outdoor printing recommended. 2. Yes alot of people run them, a matter of fact I see more HP 5500's than kodak,incad,epsons combined. 3. Yes its a great machine, it doesnt get much...

Why would you need a cutter if you buy a print/cut machine?

I said it wrong production speed is about 160sqft. hr. but you can run billboard mode on that printer and run it up to 300sqft. hr. Sorry bout the mistype just got going to fast..... see what happens when you compensate speed for quality LOL Profiles exist for that printer I have a list...

One other thing, profiles exist for this printer in droobs it has some good profiles out there you will probably be running color rip with this model it is basically a wasatch type of RIP and works well. If there are alot cheaper units out there that do what the SC does like Schurm states...

The SC doesnt have optical sensor on cutter head, nor do any of the roland units prior to the SC model. You can still print cropmarks take out laminate and then put back in and instead of automatically reading those marks you align your cutter head on top of those marks. If you look on the...

I have done atleast 50 of these, but I am a roland technician. There really isnt illustrated directions on how to do this. Roland put a bulletin out about this as a known problem there wasnt a service illustration of how to do it though... I will try to help as much as possible...

I would go with Tony on this one. Hey check the catonic inks I find them to have a little beter adhesion and flexibility.... Like everyone else is saying it has everything to do with the lamps,speed, and pass control. When purchasing a flatbed you really need to put all the cards on the...

The graident issue is a known problem with versaworks.... If only they would box the XJ series with postershop? That wont ever happen, but as far as gradient and the best dot pattern per pass ONYX is what I like and see printing good production quality output.