Search results

Did you just say MUTOH lol go see your ink coverage and pass control then come and compare to SoljetIII and you will see why mutoh has 1 head and the roland has 6 of them. The kicker is that the mutoh uses more ink with canned profiles than the Roland. Time your mutoh valuejet even if its a...

If your stretchy problems are happening after 24hrs. curing. It means you are putting toomuch ink on that media and just by the media type you are using I can tell you it does have something to do with that type of media and using the wrong profile out of versaworks. If you put toomuch ink on...

Billboard setting on the xc-540 is good. If calibrated right its alot better than the competition I really dont think you can compare the vp,rs to the xc though just b/c of ink coverage 4color 4head machine, or 6color 6head machine, on 2 pass billboard mode with feed calibrated and heads...

A reliable cmyk spotcolor system would be alot more effective than what I just read in this post geeeezzzz.... Do you expect every end user to understand the science of color between input/output and so on so forth. This is just a opinion but its kinda wierd seeing you all post like this and...

I am a service tech. and have seen a few of these around never heard anything good about them and frankly see them as a engineerd nightmare. If you are lookin at a entry level flatbed hybrid machine I know of a client of mine that has a Gerber solara uv2 thats 6color cmykorgr. Prints...

Here's the deal with the summa DC3,4 they are slow real real slow. If you are looking for something to be cost effective its not going to be b/c of the foil cartridges you have to run. Real world stats on these machines 30 to 40 sq. ft. per hour and coverage cost just for the foil cartridges...

The vendor price of $1000.00 is due to price increase on the epson dx4 head since its not being used as much as it use to be in solvent printers and we all know supply vendor mark up. Here's the source I use they will have the best price and always back parts warranty. Also unlike...

This is a fairly common problem with the roland print/cut devices. What happens is the cable that runs from the mainboard to the cutter head that controls contour cut/pinchroller sense/media sense and sheet cutting wears out. What needs to be done is replace that white data cable and plastic...

Seen and heard it before in my experience it has been the fan that cools mainboard. Look under machine on the right and towards the back. On the 1304 I am not sure if it is visible if so yours might be fan about to go or just needs cleaning. Let me know when you find out

If this was recommended its for ease and no purpose. The reason you have a rip is to send a media profile which is (ink limit,feed calibration, heater settings etc.) Depends on if you are using roland media if so you want to use media settings. If you use printer settings in versaworks you...

I would soak the head like netfryer is referring to and if for some reason cleaning and soaking the head doesnt clear up the deflection and depending on the age of the head the nozzles could be warn out. One thing I will tell you is that the head doesnt cost 895 like pacific coast refers too...