• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Roland XC-540 Cutter Not Reading Registration

    Software We use Flexi Sign 8.1 V 1, Production Manager 8.1 V 1

  3. Roland XC-540 Cyan Head Malfunction

    Test Print Image Here is the test print image for review. Thanks!

  4. Roland XC-540 Cutter Not Reading Registration

    Our Roland is not correctly reading the registration marks to die cut printed graphics. When you send to cut it reads them and begins cutting as much as 4 inches off the mark. We had an issue before with the eye being dirty however the GA that dealt with the problem is now living in...

  5. Roland XC-540 Cyan Head Malfunction

    Hope this helps--when printing the head test head A is only printing half of the cyan (the entire right side is missing). All of the other heads are printing the full test pattern.

  6. Roland XC-540 Cutter Not Reading Registration

    Our Roland XC-540 is not correctly reading the cut registration to die cut graphics. I am thinking it might be something to the effect of a dirty or misadjusted eye. (We had this problem once before however the GA that assisted has relocated.)

  7. Roland XC-540 Cyan Head Malfunction

    We have a Roland XC-540 and one of the cyan heads is malfunctioning. We have replaced the cap top with no change and cleaned. Does anyone have any suggestions how to address this further? Any ideas are welcome!
Top