Search results

We have had an Graphtec FC4100-100 for over 8 years. In all the time I have worked with it, I have rarely encountered any problems that could not be easily solved, but last week a new problem appeared and we have been unable to fix it. The plotter no longer cuts anything correctly. It does not...

I've been exploring my options for a new flatbed printer the last couple of weeks. At this point, I've narrowed it down to the HP FB500/700 and Mimaki's offerings. This is in part due to my previous experience dealing with HP and Mimaki. The information in another thread...

Thank for the feedback everyone. I did call Nazdar after reading the responses; they definitely do not have a replacement ink.

We have a Colorspan 72UVX. It's just over 7 years old, and we've had a lot of problems, but it still runs and puts out acceptable print quality. It's the only flatbed printer we have, and the vast majority of our work goes through it. Now we've been told that HP is going to discontinue the...

I have an unusual issue with black ink on our Colorspan 72UVX. It appears that black ink is leaking into the carriage, but I'm not sure what is causing it or how I can fix the problem. A couple months ago, in the middle of a print, our Colorspan 72UVX quit putting out black ink. We printed...

I have been using a Colorspan 72UVX to print directly to corrugated plastic for the past six years without many problems. Corrugated plastic has been the one non-roll material that I can print on consistently without trouble, but now I've run into an interesting problem (that fortunately does...

Raster Link Pro II

This is a problem we've been having for as long as I can remember, and we've always found a work around to fix it eventually, but I figured I'd check and see if anyone knew the cause. Sometimes, randomly, when a raster image is sent to our JV3, the print will come out fine except for streaks...

We have been having problems with our Colorspan 72UVX for over a week now. The problem began with the lower trolley plate bearing going out. We have since replaced the bearing, and the carriage can be moved much more smoothly than before with the new bearing in place. However, I still cannot...