Search results

It looks good as is , but I think i would go around the back & the front. You can always take it off if you dont like it. :thumb:

Please take this in good fate, but you could put the best wrap design in the world on that car....and it would still look shite. You need a small cheap van

thanks for your comments guys, Dan i just install for a few large print houses in dublin and have gone from doing 5-6 wraps a week to, well that so co car is about no.20 this year. So things are very slow over here

very nice work, i have never seen wiper arms wraped before:thumb:

It was designed in the states, I like the graphic fade out in the corners,its a silver car :wine-smi::wine-smi:

This may sound simple but try water or soapy water,done many plain wraps with no laminate never any problems. It sounds like something in the atmosphere. The trailers are handy to do provided your not covering the frame,one man will do a 45ft trailer in about 6 hours

Show some photos

Banner/ curtain sider material

welcome from Ireland

:rolleyes:You need a curtain sider vinyl. I have done some using 3m,ask your 3m rep about it

I used a pvc pipe today to roll the vinyl up on as I applied top to bottom..worked pretty well keeping the roll straight instead of bending on each side. Try just rolling the sheet up,from the bottom

just an idea The world is is your lobster on this one:wine-smi:

TWO STORY building. ,bay long enough for a 45 foot trailer,high enough for a double decker bus.So about 60 foot long 32 foot wide. Two story in half the 32 wide,with office and large work area on first floor. Ground floor,reception area to front of building 16x20.The remaining 40 foot behind...

After a few changes finished them today

Doing four of these ,The cars are original cream in color ,Two are been wraped in white and two in red .Then putting the lettering on them

Signmaniac your not bad at this:notworthy:

Your wife works there. Donate it and claim it (cost about 100 )? They will more than likely come back for more ,Then say thinks are bad recession bla bla I will have to charge this time, then get your cost back Saves all that messing with the wife working there

This any better

You said it kurt

Thanks guys I should mention , starting off= very little money. I will show it to customer tomoro and see what he thinks. Average price for this something like this is about 300-350 euro.