Search results

WeFixPrinters.com are here to assist with small and large format printer issues. We have been around for 25+ years and are Epson Large format trained and authorized. Located just south of LAX in Redondo Beach, we perform on-site and offer carry in services as well as remote tech support...

Pour some solvent cleaner that comes with the printer into the flush box after you clean the grid that pops out

That looks like a bad print head.....Message me and I can get you info on cost etc as I am an Epson tech wefixprinters.com rob

I am an authorized Epson tech...Rarely is the main board the cause of an 1A39 error....you would have to have had a terrible electrical spike or worked on the printer with it plugged in to damage the main board. Also, you don't need the adjustment program to reset the 1A39. The 1A39 does not...

That is a print head error, very rarely can be a main board, I am an Epson tech and can get parts. That head is around $1900, not terribly hard to replace although there is are some parameters printed on the print head that is to be input from an adjustment program that is available on Ebay...

Actually, if the cap stations are damaged or stuck, you may not want to mess with them, you can however, slide the head all the way to the left and open the head maintenance section, you can then dab the face of the head with cleaning solution (or ink if you don't have the solution and then...

There should be a small plastic door on the right side with a screw, if you remove the screw and the cover, you can insert a long phillips head screwdriver in the opening and and manually lower and raise the capping station.

How about using the firmware update tool from Epson's website. If it is just cycling, you will need to put it in firmware update mode. If firmware doesn't do it, you may want to have someone flash generic parameters to it. As I may have mentioned earlier, most of these boards come without...

You may also want to try having the tech flash generic parameters to the printer. You may also want to try to reinstall an older version of the firmware....If you are using compatible ink, that could potentially cause an issue. What was the reason for changing the board in the first place. I...

These printers are under high pressure and leaks are common in a few of the junction boxes. There are rubber O rings on most of these junctions....If you see a leak coming from a junction box, a common area is to the right side of the main board, behind the paper lever....just take a #1...

Hello...I am an Authorized Epson printer tech with 25 years experience, based in Redondo Beach, CA, near Los Angeles. I'd be glad to offer my tech support help, provide parts, or perform repairs locally. We fix Surecolor printers and all Epson Pro Graphcs printers. We can get print heads...