Search results

Use a solvent filled syringe attached to a damper and fluch the head out over the cap. make sure the cap is open so the fluched fluid will drain into the waste bottle,

If I were to attempt that I'd probably be looking at using a liquid laminate. Then again I have never tried it, even with table banners. Maybe print on quality vinyl and apply it the the banner?

....or let some air out of the rear tires. Vans always seem to have lines that throw you off. The bottom lines following the wheel wells are usually best for doors. But alot of fleet vans we've done have the majority if not all of the graphics in the upper 'window areas'. In those case the...

Never used magnets on a vehicle wrap. I hope you don't plan on putting them directly on the paint. Although the vinyl will cover any scratches or knife marks in the paint. lol I imagine your using them as placeholders for the vinyl?

Welds as in heat seamer welds?

^this

We outsource it to an awning company that sews the hems up for us. We get a choice of colors on the "tape" they use that has made a nice impact on a couple jobs

What is your ink configuration? CMYK (4 color) / CMYKcm (6 color)? CMYK tends to be grainier in the lighter tones because it doesn't have light cyan and light magenta to fill in the 'gaps'. Try switching to 8 or 16 passes too. You tend to see more banding with a lower number of passes and it...

Hey, she wrote an article on how to avoid 'cellphone elbow'. I wonder how much more involved and intelligent it was than the 3 simple words "BUY A BLUETOOTH!"? (I didn't have the stomach to read it.) winner winner

x5 is the same i do believe

i would spray the cloth first then wipe.

isopronanol and a lint free cloth

Good job! lol

Are you capable of installing exterior wall vinyl? A crane truck will be needed

I'd love to tell you yes. Really i would. lol. But not until the printer lets the magic smoke out.

techspray zero charge anti-static spray may help (no fumes and a little goes along way). I use it for prepping flatbed materials but it often wonders into other parts of the shop to replace the aerosol sprays now. I get it from Allied Electronics p/n 1726-qt. If you have an air flow system for...

Are you inserting partial ink cartridges when reloading the inks? I remember having issues flushing my JV5 with partial cleaning carts. Maybe there's some correlation?

I'm surprised a 3rd party ink supplier hasn't come up with something similar to be able to reuse those cartridges, only WITH customer incentive!

Did you try switching head cables? Switching eg; cyan and black cables at the printheads and see what the output is

Or.........(in bitstream) "do you also want to remove fonts from the disk?" poof! magic!