Search results

Ok it seems I keep getting these weird lines in my print. They go away after doing a cleaning, but come back fairly quickly. From the pic below you can see it is only doing it in the blue, not the red. The pic isn't the greatest but you should get the idea. ALSO, I noticed on some other...

OK I just printed a 10.5x36 billboard on my vj 1614. It was a mostly 100% darker blue coverage, with color values rough 100cyan/80magenta/x/x. I noticed the ink status #'s before and after I printed, however I don't know how accurate those #'s are on the printer. I used the following % of...

I don't know if this should be posted here or in the flexi forum, but I figured most people using a mutoh is probably using flexi. I have a VJ-1614 and I have 2-3 10.5'x36' billboards to print. These don't need to be very high quality because of the view distance, I will probably use the...

I have a VJ 1614. I can easily reach and clean the top rail and 2 front rails, but I cant reach the bottom rail too well. Is there a tool or something to easily reach the bottom rail? I can get to parts of it, but the rollers keep my fingers from being able to slide across it. Thanks!

I have googled and searched these forums without a single match to this error!? The printer was printing fine then just stopped with flashing lights reading this error E016 TLB-S(03) What is TLB ? What does this error mean? I am about to restart the print, but im using 3m 180 and already...

I was wondering if anyone has tried printing double sided banners on the valuejet models? I have a 1614. I sometimes get requests for banners that are truely doublesided and not just two pieces folded over and sewn. Here are my main concerns: 1) Assuming you can do it, are there any bail...

Since this morning when running a few different banners (one was only red and white) I have been noticing some ink drops on the print. Its not very often, say every 8-12feet i will get like 1 drop of ink in a random spot. Its not spashing across the media or anything like that, just simply a...

I have a couple questions relating to ink usage. When I bought the machine it was advertised at .20 a square cost, I later found that to be an average of some sort. I noticed on the mutoh ink study that prints with more coverage etc can cost up to .35! My question is, does anyone know...

I use flexi mutoh edition right now and I cannot get the banding out of this static cling im using. Especially in the blues, it leaves dark wavy lines (print in wave1.) Pf adjust doesn't help, it just makes the lines less dark and then leaves white areas inbetween each wave. So I am hoping...

Does anyone know what causes this error? I have gotten it about 4 times in the last 2 days, now it did it twice in a row when starting a banner. It prints about 2-4 passes and errors out! I have no idea whats going on.

I have googled the part # the mantenance PDF had in it along with several other key words and I cannot find a single website that sells the cleaning supplies and such. The main thing im looking for are the mesh pads, mine need to be replaced desperately. I havn't tried calling anyone yet...

I noticed while printing images on media as small as 24" centered in the printer that when it prints it will go to the edge of the image and return the carriage all the way to the start. Is there a way for it to only hover over the area that is being printed? It is traveling almost three times...

OK I finally have everything up and running. Last question!! Does anyone know how to get a status on the print, like the time left etc.. After it rips and says "printing" it disapears from the production queue and I cannot locate a time remaining on the print. At my previous company I...

Hello everyone. I have a vj1614 connected via usb. In using flexi and every print is coming out almost double the size! I cannot seem to figure out how to try connecting via network port. Is there any documentation on how to configure it via cat5? Thanks

OK I gave a brief desc of this in a previous thread. I rip a file in to production manager, it reads for example 8"x12". I unclicked enable driver options just in case to try to fix this problem. When the printer prints the file its coming out to like 20"w!! Every setting I have checked...

Hello everyone. I am new to these forums and I come here in hopes of getting some help. I just purchased a Mutoh 1614 printer and Flexi 8.1v1. I am very new to the software as well so it may be me and not the software.. Anyway heres what I have going so far and what my problems are. I...