Search results

My Q54 cutter does not show the condition option on display screen. Is there a way to fix this?

Thanks so much for your help. I just went ahead and started putting back all the wires , just made sure every thing fit where it should and turned out very easy to put back together. Not a tech kinda gal , very hard to get a tech out here where I live and not much people on island that can fix...

Checked all fuses on the mainboard. And all are working fine. Wondering if I should do a flush on the nozzles? My printer had been sitting for almost 2 years before we finally was able to get the parts we needed especially all the research and time to see how we would fix it.....we live in the...

Thanks I will check mainboard fuses again. I replaced the F2 right before I changed out my printhead as the old printhead was blowing the same fuse out.

okay yes that is done but now it prints nothing at all. No inks are coming through....tried cleaning several times but no luck......wondering what it may be now?

Hi! wondering if you were able to correct this problem?

Update: Fixed the problem; Now when printing it prints no ink , nada! its just blank but machine is working just fine. I notice when we cleaned it several times I dont see the ink pumping through tubes at all. What could this possibly mean?

In need of some help.....Had a base fuse error message, changes out the Cr Board, same message. Changed out print heard and now new error message says CM S/C INK Err ....what could this possibly mean?

When you say ribbon cables is that the head cables from print head to main board?

Anyone have a picture of mainboard for 1324x inside printer? I removed my mainboard from printer and did take pics before removing the wires .....I cannot find the pics anywhere, not sure where I may have stored them. Wondering if anyone has a sample/pic I can refer to???? afraid I may insert...

Thanks for your guys help. Will get right to this today and hopefully the outcome is good. I did get a new extra printhead just in case but am hoping its something with the ribbon cables to easily fix.

When we checked the fuse on CR Board, it worked fine. Anyhow we changed out whole CR Board with a new one and same error message for base fuse. We checked the fuses on the main board and only the F5 fuse was not working. It was replaced but again the fuse had blown. Is there any reason why it...

Wondering if it just needed a fuse replacement on the main board perhaps?

Hi Keevan I hear ya! I know this thread is several years old but any luck fixing the problem?

Thank you I will do just that

code is E152Err Base Fuse.....we already checked fuse for CR board but good. Anyhow changed out the CR Board and still get the same message. Checked the fuses on the main board and the F5 is not good. A friend replaced the fuse for us and still the same error message after printer...

What do you mean by same rating? How can I make sure? Thanks so much for your reply.

Im sorry you are right - it's actually the F5 fuse not the F2 my bad.

Wondering if fuse 2.5A for a Mutoh 1304 can be replaced into Mutoh x1324....... My printer has an error message for base fuse- we checked the F2 fuse on mainboard and there is no continuity - I can't find 2.5 fuse for x1324 on the internet anywhere, wondering if 1304 will be ok?

I'll post a picture tho thanks!