Search results

Check to see if this is not enabled. I had the same issue Cut Server > Summa setting (left side gear icon) > enable roll server. It’s a known issue with Summa and Onyx

I have tried all those suggestions above but none of them ever work for me. what I did instead was to make 1" squares with white vinyl with the middle cut out the size of the black squares, than place it over the existing squares. That way there is a big block of white around all the marks.

You should be getting the best adhesion on ACP compared to all the plastic substrates My questions are 1. Are these sheets meant to be printed on? 2. Did it come with liner? 3. Did you clean the sheet with 99.99% alcohol prior to printing? 4. How did you wait before cutting the sheets? 5. How...

On second look i notice it’s only on one direction (left or right, not sure which direction was your print going) which makes you correct it should be everywhere when there is static. Try going to tools menu on bottom of screen and do bidirectional calibration. It seems like your printer over...

That’s not bad batch of ink. It’s low humidity in the room. We had that issue one winter. Check humidity in the room it was at 15%.We bought a humidifier and humidity went back to 40% and it went away.

I spoke from my experience between ND and Grimco. So I compare the two, while there may be 4 other companies out there?

Hi Michael I’m from Ottawa here. Yes for whatever reasons Grimco sells them cheaper than anyone else’s I got quotes from. What ND is telling you is the truth. But I can tell you would get far better and faster service support from ND. This is the case where paying more would be worth it. Cheers.

I had the same issue. Who gave you translucent vinyl you are referring too?

we charge by the linear yard. Plus the cost of weeding. If you buy it by the yard. You charge it by the yard. For example 22x54” = 2 yards of 24” vinyl = 2x$18 + $10/15min for weeding and tape.

Had the same issue. You need to decrease the fan suction. But at same time if you do that the fabric might not be able to move forward

Hi Richard. Unfortunately they are not repairable. Have to suck it and buy a brand new one. I know it sucks dipping 5k$ into it.

We just bought our first ever large format laminator. and we bought the GFP 355TH. very happy with it. Comes with a very straightforward installation. It was perfectly aligned when we got it didn't have to do any adjustment.

I have made this work on LX365 with onyx 12, 18 . not sure how different it is from LX310 and flexi. I run it and it works great with following specs 10 pass 221 F temperature 90% saturations Latex Optimzer 12% Vaccum Printing 15 Advance Factor 0 Interpass delay 0 printing airflow 175 input...

Question; how do you find the ink adhesion with corrugated plastic? better than HP? Also how long has it been since you swapped the inks?

Never mind. I just saw it. That’s weird. Never seen them before. Might be plasterizer issue?

That menu is hidden you need to go to System > tools > service printer > device test > pod test > press the following Up up up up up down up down up up down down up up up down Go back to two pages than go back to device test you should calibration items. Let me know if you need any other help

Hi there We been printing real estate signs for 5+ years on FB509 I can tell you the following on Corrugated Plastic (since that’s what real estate agents want) 1. As long as your not printing edge to edge you can use laminate to seal the prints in. We maninly use Drytac InterlamPro version. 2...

i wish it was as simple as latex printers. What nate says thats how it is I guess.

Thats how it is in Onyx as well. That would make sense now. Thank you for the help.

No such option anywhere in those places. such annoying thing.