Search results

hello have you got some solvent cleaner yet? amonia i don't think will clean solvent ink, nor dileminie what you now have to do is work out the formula for solvent cleaner!!! toil and trouble...... .

hello at the rate of which you can pull air through that head with a 10ml syringe 'to me' denotes a new head totally clear, thats good news in so much as there is nothing in it, so wait for the new manifold ...20 days!! IF you put it all back together how on earth will you be able to stop...

hello can you suck anything up through the head? -i mean 'air' if not sit it on a millimeter of solvent cleaner for half an hour any try again then do the simply test to see if you have maybe fixed the seal from head to head capping i.e. you may put it all back together and it may start...

hello again STOP first ascertain that you don't have a water based manifold on that head are the nipples soft and wobbly? - if so its a waterbased manifold I hope it is that simple and that the inlets on that manifold have softened and closed up, as its a cheap fix can you suck anything out of...

? also what kind of pressure is the pump sucking at when sealing @ 100 percent

hello iI have just fitted this mutoh vj dx5 manifold http://www.ebay.co.uk/itm/251728193434?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT to en epson 4450/4880, using a stock although solvent damper set...

hello can you hear the pump running? is it struggling or real easy is teh side cover still off? if so put a syringe on the cap top outlet whilast the head is on it and pull you will deffo know one way or the other if the headis rock solid with dry ink - massive resistance or there will be a...

hello why not get an end of life r1800 2400 for free. the easier if you can find one is getting a stylus pro 4800 as they aren't locked. better still get a 4 colour 4450 and convert it to solvent with a manifold, pump lines nad o-rings and use it as a head washer - so you can nozzle check...

hello hello the platic part that comes from the electro magnet that locks the head is not made from solvent resistant plastic if you look at where it touches the carriage, you will have a tiny amount of crusty sticky stuff on both surfaces when you last cleaned it you put solvent oin it of...

hello doesn't that short term corrugated plastic sheet got hard and brittle with age? turn into shartds

hello did they just update the gregorian collinder with an extra month? I see holes

do the head fannymolds happen to be solvent resistor ? considering the sc larger breadbin has them? ok so i gather they are simply a twin tft head 4 colour affair at 2ft 3' and ao -so 44 inches 1040mm I am REALLY considering a 2 footer just because thems CHEAP. 2k in the uk can you get the...

aha, the driver is rj900c you won't find a 1204 driver. the driver will let you print without a rip, you just need to print it in photo quality, as I think the driver is for textiles and it just prints lines would have worked usb I think, but put it on the network anyway menu 1 - scroll down...

is that correct??? test print = excellent color pallette = excellent download driver for rj-900c, print something from notepad = works usb send an a4 from corel - just black lines - rip needed? have posterprint rip and a dongle with number on disc - I can't seem to instal the dongle? is...

http://myx900.com/

great great -whats not so great is that I just removed the slider, 2000 wet and dried the contacts, sliced with a scalpel .5mm from the ends of the 5 main cables, re-inserted them so I could physically see the contacts were not being pushed out, did the asme with the 8 small head cables, put...

hello are there supposed to be any lights on the slider board illumminated? as if i remove the 5 main cables its the same have lights on the boards so buy a slider board can you just verify - if the slider 'was' good, and the board bad - would it be bad on just one head? i.e. would the...

hello still can't send you a p.m. Should I take the heads out and clean then do I need them in to tesy the connection from main board to slider

hello i have a service manual for a 3 head 160 - but I cannot find a specific jv3 75-sp2 service manual anywhere. YOU'RE inbox is full /\ what I mean is everytime I switch it on, it asks what type of ink, I scroll to ss2 then it starts to fill, then when finishes, moves lefts and flashes...

hello hello. i cleaned the ribbons with isopropyl. The previous owner had the ribbons fitted, but maybe correct or not, the numbers on the slider 8/9 10/11 12/13 14/15 were all muddled up I didn't turn it on, simply removed the head, fitted the heads, put empty refill carts and chips in...