Search results

Hi! Thank you for all your posts! After cleaning the enconder the machine works good. Maybe not perfect - but I work on it. @ lulok07: I look forward to your pictures of your adjustments. After doing the "hardware-things" is the next step to take care of the profiles for rasterlink 5. Lets see...

Hi! I did the drop.pos adjust 2 times. The first result was much better than the unadjusted print - but not perfect enough to sell the prints. So I did a second pass - but now the print isnt acceptable. Near the parking-position (att1 - parkingside.jpg) of the printhead the print is much...

Thank you for your answers! I will try as you say - I also own the maintenance-manual - but I didnt know if this is the right way. Will now try to align the head. Will post here the result. Martin

SOLVED - JV33-260 is printing well Hi! Thanks for all your answers - after replacing the Ink-tanks and cassettes and doing two 99 minutes noozlewashes the machine is printing well. Only the adjustment of the printhead is to do. Hope I get it soon. Martin

Hi! Im completly new in LFP, after preparing a used JV33-260 (new printinghead, new ink), I run into troubles after adjusting the head. Printing with RasterLink is working, but printing in bidirectonal mode causes ghosting - a difference between the two ways about one millimeter. (see...

Hi! Update: I checked the tubes between the ink-cartridges and the valves. (the machine has a modification to use other inks than from mimaki). And - uh - the tubes were stucked with dry ink. After cleaning the tubes, the printhead is supplied with fresh ink - and its printing well! So I want...

Hi! @sightline: thank you for the hint! So there should no air in the lines? Thank you in advance! Martin

Thank you - your reply is a helpful! Will try this in the afternoon. After a short sleep, I think that maybe the flatcables form the board to the printhead are broken - do you think this is possible? Best regards, Martin

Hi! Im completly new to LFP, and so there is my first problem. I got an used JV33-260 which was plug off from the circuit for a while. Some tries to get the printhead working failed - no color was printing. So i bought a new printhead and replaced it by myself. So far, so good. But now...

Thank you - that saves really money!