• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Is it possible to adjust head height on vj628?

    Just as title says, I know there is two white pieces with possibly a bolt going throught them, but those were so insanely tight they just stripped instantly. (correct snap on 6 point socket). I dont see that being possible, or how it could possibly do anything. So is there an actual way to do...

  3. Mutoh 628 black ink fades as it prints

    So I have an issue with black ink, if it sits a few hours, it will nozzle check maybe 60%. If i do cleaning, it will nozzle check 10%. If I print test, it starts off gray lines and ends with lighter gray lines. Replaced printhead dampers pump pump lines cap top ribbon cable ran cleaner...

  4. Adjust pinch roller pressure

    Is there a way to adjust pinch roller pressure? I have the roller on the far end that is not putting any pressure down, causing print head to hit the media. Mutoh 628

  5. Anyone know hose schematic for the 3 hoses on capping station?

    Mine has been apart more times than I can count, and no idea where each officially go. Ive made two good prints with new capping station, printhead, cables, hoses, etc....and now lost blue, black and red...mostly blue. So trying the 3rd capping station of the year and new hoses and dont...

  6. Mutoh 628 error ID-85

    Old printhead gave this error. Replaced head, tried many cleanings, couldnt get two channels to work on new printhead. Replaced cables. Error 85. replaced cables again error 85.

  7. Mutoh 628 no ink after printhead

    I have a mutoh 628, I have replaced cap, pump, dampers, trying to get it to print all colors with no luck. Now I replaced printhead, and I can see no movement at all in tubes. Many cleanings, little charges, and zero movement. Tried priming the lines but no change. Tried filling cap with...

  8. Mutoh 628 not printing colors

    I have a mutoh 628 and had issues with color not being full, no matter how many cleanings. So I replaced pump, and cap. That helped. Then replaced dampers. Struggled for weeks to get air out of lines. Put in new cartridges and filled with cleaning solution, ran that for weeks. Soaked...

  9. Air in lines Mutoh 628

    So I ran out of ink in two cartridges which introduced air into lines. I have tried using the little charge to fill lines but no change. Any advice on what to do? Nothing seems to change it.

  10. Printer profile for Mutoh using Motomark 235 ??

    Looking to find profile for this material, not printing very well.... mutoh 628, temps are probably wrong, no idea.
Top