Search results

I would love to help, but im not an expert on Epson, however that might be happening due a suction or heat issue.

Thanks BigfishDM, floor is Terrazzo, tried in a small area with a heat gun, but it is almost impossible, for now I'm working on a disclaimer that it might take various hours to remove.

Hi guys, I have a customer with some permanent vinyl. They don't know if it was Avery 2903 or IJ35 that was installed on the floor a few years ago. Now they need to remove it. The question is, what is the best option to do so, and how could it affect the flooring if any chemicals are used...

Thank you guys! Ended up using conduit and it worked great! We added double sided tape on the ends to avid the conduit to fall

There are grommets every foot. I’m planning to use quick links for this, each rated for about 205 lbs, so for now, weight is not my concern unless there’s something I’m overlooking. The banner is a 13 oz black-back banner. For now, I was advised to use conduit, so I’ll give it a try and see how...

Hi everyone, I have a 50-ft banner to hang from the top using grommets and carabiners. The client is concerned about the bottom moving too much, even though it will be installed indoors. Unfortunately, there's no place to secure it at the bottom. I’m considering adding a steel rod at the bottom...

Thank you, guys. I used Avery 1105 + 1360. The van was involved in a crash on the driver’s side, which was only primed. However, the areas where the wrap is failing are mostly on the passenger side. It was power washed twice with plain water, left to dry overnight, and then cleaned with...

Hi guys! I recently wrapped an entire van, and less than a month later, it started failing in some areas. Some spots are flat, while others are in the recessed sections. The application process was the same throughout, and the other side is perfect. I cleaned the surface with alcohol, the...

thanks for the offering, I will keep this on mind for future projects!

Thank you all, we just found a garage for this project, appreciate the input!

Hi everyone, I have an upcoming job for a box truck, but it won’t fit in my garage. I understand this isn’t the ideal scenario, so I’m wondering if it’s worth trying or if it would be better to pass on the job. If it is doable, any tips would be greatly appreciated! Thanks!

yeah, This is the kind of customer who has been bringing a lot of food to my table so I try to make them happy every time I can, this is for the kind of project that was jumping from one department to another until they realized it was late. I found a company in Maryland who is willing to tackle...

Looking for someone who can handle a rush order for me. It's a set of letters and a logo made from 1/4" or 3/16" brushed aluminum or 304 stainless steel. I know Gemini can make them, but my client has an event on Tuesday, which is why we're urgently trying to get it done. Thanks.

Yes, it was the first thing I tried, installer can't come to fixe it, so his suggestion was to heat, poke put pressure and get the air out, I've tried, but it keeps lifting, so I'd say I will have to re do the whole thing.

Thank you all! Seems pretty bad for me, priority is to keep customer happy, so after trying to fix it a few times, I will just re do the whole hood. That being said, I do mostly wall wraps, so any advice to tackle this by myself? Thanks

Hi guys! We print using the Avery 1105 & 1360 kit, installed on an F350 Heavy Duty. Everything seems fine, but the "Super Duty" letters keep lifting. I’m not an installer myself, but the person who did the installation said it was normal and that with heat and some poking, the vinyl should be...

2024, wonder how much pricing has been changed.

Hi guys! Have anyone of you used STS inks, If so, is it worth it? It is for a Latex 570 Thanks https://www.stsinks.com/.../replacement-bag-for-hewlett.../

Thank I will check. It is going to be installed on the top

Hi Guys! I will try to make this super short. I have a client that wants their logo on an awning, as per the landlord, we can't paint the awning without approval or paying for a new one, client just want to add a logo in vinyl, seems that someone told them it was possible with no issues, I...