Search results

I used my go to "Find my Font" software but didn't come up with anything even close. If someone can help me with this I would greatly appreciate it, I only need the logo and I do not need to type anything else so if you have the font that would be great too. Thanks Gary

When routing DiBond do I need to use a mister or will it route fine without the mess of a mister? What bits? I'll be using a 3.5hp Router can you give any advise on feed & speed? Thanks

Im thinking ov building a vacuum table for my old / new to me 4'x8' router table, I initially wanted to make it out of MDF but the I was thinking if I try cutting aluminum the mister fluid will swell up the MDF, so my next move was to build it out of aluminum rectangle tube until I realized it...

About 20 years ago I had to make a decision between buying our first Digital printer or getting into 3D signs and buying a router, I choose Digital, for a few reasons one of those being that no one in our area had a digital printer & we live in a rural area & I wasn't sure if the economy would...

About 20 years ago I had to make a decision between buying our first Digital printer or getting into 3D signs and buying a router, I choose Digital, for a few reasons one of those being that no one in our area had a digital printer & we live in a rural area & I wasn't sure if the economy would...

We have decided to sell our beloved Gerber Edge 2 to make room for some new equipment. It is in very good condition, we just don't use it much anymore to dedicate a corner of the shop to it. I am including all of our foils. We have over 130 foils mixed between Gerber, Zero Nine & Duracoat in...

I absolutely loved to use Marker back when I was running Omega but now that I don't use Omega much anymore I miss being able to use it without a bit of hassle from moving around vector copies of the letters. Does anyone have Marker in a TTC format?

As the title states, I'm looking to purchase a Xrite i1 Pro 2 so I can create profiles for Onyx and possibly calibrate my monitor and scanner depending on what features & licenses are available. Thank you

I'm getting ready to purchase Onyx 12 Postershop but I'm concerned with the fact that there are not many profiles to print with C-M-Y-K-Lt.M-Lt.C-Lt.K-Orange on the JV300. Does anyone have experience with the Onyx profiles on 3M 180c or if anyone has any custom profiles they would be willing to...

I doubt I will ever need to ask for font help ever again. I purchased FIND MY FONT, I'm pretty sure they are an advertiser on this site and can be found here. Find my Font | Identify a font from image, find font from photo, find font from picture the price is incredibly lowell especially...

Here is our setup we have a JV300 and a Summa S2 T140 and 2 computers. I design and send prints directly from my system, then send the cut data to our second system. I have been using Sign lab for both cutting and print & cut for years with very little problems. Whe I purchased the JV300 (8...

I am looking for this font, I know I have seen it several times but I've looked through all of my fonts I tried to purchase Find my Font but something is going on with the credit card payment, I guess it has to do with using a debet card and overseas purchase Thanks Gary

I'm getting a new computer and Monitor for my design station, I'm considering a 27" IPS Monitor and I saw the Dell curved screen SE2716H but I'm not sure how the curved screen will work for deign, do the horizontal lines look curved or wavy? Thanks

I'm In the market for a Substraight cuter and was initially looking for a step shear but we really don't have room for it. So now we are thinking of either the fletcher FSC or the Kleencut 250. We are wanting this mainly for .040 aluminum, DiBond and PVC sheeting. I have looked on here for...

Ok so it's been a while and I'm going off of memory so I may need to recheck my statements if something sounds wacky. I haven't really been using the Envision for a couple years now because we are having issues with the cable / communication we are running our cutters & edge 2 from a...

I have a Summa S2T-140 on its way to me, so I'm considering selling my Graphtec, but I'm unsure what a fair value is. It's in good working order with no issues, we are just starting to do more & more 15 Mil. Polycarbonate control panels and the Tengental head will help us a lot. I have 3...

Ok so we purchased the S2T140. I'm happy with the purchase except I'm a little concerned about my print & cut workflow. With my Mimaki JV300 -160 & Graphic FC7000 -130 I design in Signlab, cut from Signlab VPM and print through Rasterlink, I'd do it all With Signlab but at the time of purchase...

I'm pretty sure I'm getting a SUMMA S2T-140 and I currently design in Signlab, Print through Rasterlink ( Because Signlab doesn't have drivers for the JV300 any help is greatly appreciated. Thanks

Ok So I'm 99% sure I'm getting the S2T140 but I want to make sure I can get Rasterlink to print the OPOS marks so I can read them in Signlab VPM to Cut them. I'm posting this in the CadLink thread also I just figured people with OPOS would have ran into this also.

I'm trying to do some research on a Summa S2T-140 but the videos on line are pretty bad, I have only found 1 that has any talking and explaining features, and it isn't great. The others just have music, I know they die cut. I'm try to convince my wife to get the Summa T over the Graphtec FC...