Search results

Hi George, Great to hear that Allen was able to get everything resolved! Please feel free to contact us anytime in the future if you need anything. Thanks, George! Best regards, Phil Johnson Summa Inc.

Hi 31Legen, Just thought I would follow up with you and see if you would still like to discuss the demo model S2T75(30") cutter? If so, please email me your contact information to philj@summa.us and I can give you a call to go over everything. Best regards, Phil Johnson Summa Inc.

Hello 31Legen, My apologies for the delayed response. With the site being down I didn't see your post until today. We actually do have one S2T75(30") demo/refurbished model available if you still need the cutter. We also have a couple 64" models as well in case anybody else might be...

Hi SSPVinyl, I have seen the blade holder cause similar missed cuts in the past, hence my guess that it may be the culprit here. I see that you have called and spoken with our tech support folks and that they recommended switching out the blade holder and cleaning the cutting head, so...

HelloSSPvinyl, From the looks of the photos it appears that the culprit is the blade holder. It is likely not seated properly. I would suggest loosening the set screw on the bracket that holds the blade holder in place and make sure the blade holder is seated all the way down in the bracket...

Welcome back to the site and best of luck to you!

Welcome Hello and a warm welcome from all of us here at Summa!

Welcome Hello and a warm welcome from Seattle, WA!

Welcome Hello and a warm welcome from all of us here at Summa!

Hello Quark, I have a document that I can email you which I think will be useful as you try and flex cut(die cut) more complex shapes than just squares and rectangles. There are two variables to consider when setting up a flex cut on your Summa; the tab width(flex pressure length/pressure) and...

Welcome Hello and a warm welcome from all of us here at Summa!

Welcome Hello and a warm welcome from all of us here at Summa!

Welcome Hello and a warm welcome from all of us here at Summa!

Hello Upandup, Read through your issues and have a few pointers. First, you definitely don't want to use a 45 degree and this particular angle is not designed for use with the Summa. There are specific knife offset values assigned to each blade type(36 degree and 60 degree for the Summa) which...

Done and done. Best of luck! Best regards, Phil Johnson Summa Inc.

Hello Signs101 Members, Hope everyone is having a great week! I just thought I would let everyone know that we recently added a 64" demo model for our S2 T Series. We have just the one unit currently available and if you're interested please email me at philj@summa.us for all the details...

Good afternoon, Just wanted to let everyone know that we just added a 64" SummaCut Series in case anyone might be interested. For more information please PM me or email me at philj@summa.us. Best regards, Phil Johnson Summa Inc.

2 Units Available Good morning everyone, Just thought I would let everyone know that we just added two 54" demo models to inventory. We are making these available to Signs101 members before we advertise elsewhere. Please email me at philj@summa.us for pricing and additional information on...

Hello Airbourneassault, If I remember correctly there should be a box that you can select which says "override device values" that you can either check or uncheck on the last screen before you output your file. I believe the default setting has that box checked and therefore cut-server will use...

Hello Altapac, Sorry to hear about the difficulties with your Summa cutter. As was mentioned previously, these cut inaccuracies can occur for a number of reasons including thickness of material, type of laminate, file corruption, output settings, etc. so it is hard to tell what might be causing...