Search results

I had a know it all person tell me that it was the memory of the laminate or the memory of the vinyl. Then I showed him the same graffixs printed and laminated 90 degrees and they curled the same. After trial and error found out I was using too much wetting agent.

UV Screen Printing on the clear arcylic is the way to go.

I currently use pc's to rip & print on the Seiko's and Roland's. On my sheet fed printing I use a 2002 emac not an imac. Had to purchase the programs (quark express, illustrator, photo shop) $1300 just for the quark Suite. Ten years later the programs stopped working (aged out, no longer...

This material is very forgiving because it's full of holes. It takes longer to install wet. Cut a couple of linear feet of material from the roll and practice on your front door/window or your cars back window. Post a photo of finished job.

I print it on my Roland XR-640. 1. Use Your regular profile 2. No need to raise print head. 3. Runs through just like your regular vinyl. 4. Don't change temp or vacuum. 5. Print today cut tomorrow.

I also have a few old mutoh cleaning cartridges that I have been using for general cleaning too.

What happens when you retry?

I take my Roland CL cartridge apart when it reads empty and cut the bag open then pour the 1/2 ounce or more of solution into a container. It works great.

If it happens all the time there could be something small blocking the sensor. When it happens on my graftecs I just press 1 and reposition the head then enter.

Here is the posting.

I just got one from EBay. A PDF file, has pictures and diagrams. $1.08

I did not pay attention to the size you were looking for. WOW! I would like to see a photo of the finished project when you get it done.

I print 030 magnet material all the time,, just went through 30 rolls in four months.. If you need Only three, get the material and apply vinyl onto it then hand cut. If you need 25 of each I can do.

I'm using flexi 21 with the 9000, it has some hiccups. I now make the barcode large on the roll setting and make sure the right side pinch roller does not touch the black bar portion of the barcode.

I run five graftec 8600-130, one 8600-160 and a 9000-140 and only do straight through and kiss cuts all in the channel not on the strip. So there is no need to stop the cutting and change the blade position to do different style cuts on the same job. Every style/brand, laminated or not...

Dont blame Cooley. Mother Nature Is A Bitch. So you wanted to save $50 and resuse old material that has old graphics on it and has been in the burning UV Sunlight, and you paid your employee to remove the old graphics then clean all the adhesive off and apply new cut vinyl. Only way I would...

Sounds like the customer wants to try to do cheap by buying one magnet for the price of one and a half. You can only see one side of the magnet at a time because it adheres to metal. It's not going on a window.

I do offset printing in house when I can find the stock needed for the job. One and Two color printing, Business cards, Letterhead, Envelopes, Carbonless forms. Full color stuff I send out to 4 over or Printing for Resale in Jacksonville. Great prices and plenty room for profit.

Old non working or half working printers and cutters aren't worth the hassle of dealing with the time involved trying to sell them.. I just sent a Mutoh VJ1608 to the scrap yard along with two Kona cutters. Took less than 15 minutes to push everything out the door onto the scrappers trailer.

Booooooo for Vista print. China based company. Stop by your local print shop and see if they can help you out or go online and order from a company that does for the trade only.