• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Thickest material die cut on a fc9000

    Yes you can cut Banner Material on the Graftec 8600 and 9000. Back the pressure off by 5 from vinyl cutting and keep speed at about 30. Cut in the channel not on the strip.

  3. Contour mark scan speed

    It will scan at the speed of the cutting speed selected (25, 35, 50 ect).

  4. Suggestions Laminated Decals Not Always Coming Up with the Premask / Transfer Tape

    Try a lower tack transfer tape.

  5. Flexi cutting order

    Switch the sequence of the cuts. IF your graphics have a Blue cut line and your box around the graphics have a Red cut line, toggle the sequence to cut the Blue first.

  6. Need Help Mutoh Kona 1650 - Error #1009

    Check or replace drive motor

  7. FC9000 (ERROR) E04017 - Scans mark & Takes it home

    This happened to me the first week of using the fc9000. I'm using flexi and don't remember the error code. After several attempts I ended up creating a new cut only file with the same perimeters as the original and it cut. Also check your overhead lighting, I have also had problems with...

  8. Gassing out Eco solv printed media.

    What I print today I laminate if needed and cut tomorrow. After printing I loosely fluff the roll over night. If you can smell a strong odor from the ink don't laminate or cut yet
  9.

    Flexi position print problem

    Try changing to center.
  10.

    Seiko (Oki) W64S Orings?

    Are these what you're looking for?
  11.

    ROLAND USERS does anyone use these?

    DigiPrint Supplies always finds excuses to void a warranty.

  12. Random Cutting Depth

    These are samples of worn out blade holders. The last thing I checked on my Graftecs.

  13. Substrate Supplier Recommendations

    Piedmont Plastics Littleton, Colorado 800.777.7342

  14. Graphtec Flexi Cloud Perf Cut

    My graftec conditions are #4 straight thru cut #5 Kiss cut #6 Perf/Pounce cut. All three cut in front blade position and in the channel.

  15. Graphtec Flexi Cloud Perf Cut

    You Tube Graftec Cutters. They show you how to do everything on these plotters and how to program the eight preset conditions for perf cut, kiss cut, straight thru cut and setting each one up for for different thicknesses of vinyl. Once it's set then you run your cuts thru flexi. Easy Peasy

  16. Good material for unlaminated decals

    Briteline is produced by General Formulations made for Grimco
  17.

    Grainy Printing even with Vector art.

    I printing on two Roland XR-640 printers using General Formulations 220 No problems here. Last cleaning? Head height? Heat?

  18. Good material for unlaminated decals

    General Formulations 220

  19. How many continuous hours of printing?

    On our two Roland XR-640 printers they run 12 to 16 hours daily. Major cleaning done weekly, and always have a new scan motor on stand by, because they only have a 1500 hour life, but will run for 3000 hours.
  20.

    Do you think this is a bad roll or something else?

    Definitely try another roll. Then check temperature of everything (shop, printer pre heat, printer post heat)
  21.

    Rolnad EJ-640 Head

    Can I ask?? What material are you printing on?
Top