• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Reverse Barcodes In Onyx?

    If you print roll to roll, printer prints head to tail, then you laminate that roll from tail to head now its ready to cut, head to tail. WAHT IS THE PROBLEM. I reroll every 100' roll I print to cut on graftec cutters manually in about TWO MINUTES.

  3. ? printing direct on magnetics

    Yes I print directly to .030 I just raise the print head. The Graftec 2250 is an old one, but it's like a time, takes a licking but it keeps ticking

  4. ? printing direct on magnetics

  5. ? printing direct on magnetics

    Here is a picture of the label

  6. ? printing direct on magnetics

    I Love printing direct to magnet material on my Roland XR640. Roll to Roll. Never have I had a head strike in five years. I don't print magnets daily, I save them up and run them monthly, On about four rolls of material 30"×50'. All printed on a Roland XR-640 and cut on a Graftec 2250. All...

  7. Graphtec FC 9000 marks for long cuts

    Im printing on two Roland XR-640 and a VG3-540 thru flexi with no problems. Cutting on graftec 9800 and 9000

  8. Help! Part Informtaion needed!!

    Call your Roland dealer or go online and download a parts/service manual. I downloaded a parts/service manual for my XR-640 for $6.95

  9. Shipping Boxes

    Inside of box is printed with Priority Shipping. Local Postmaster said he is OK with it, as it is Free Advertising for USPS

  10. Printer/Cutter vs. Stand-alone Cutter

    I'm running three Roland print / cut printers but don't use do cutting on them. I cut on Graftec 8600 and 9000 cutters. Everything I print today I cut tomorrow. 12 to16 rolls of 54"×100' gloss vinyl every week.

  11. Shipping Boxes

    80% of shipping boxes we use are USPS Boxes. 20+ per week. Turn them inside out, tape them back together, fill them up and ship them out, (FedEx, UPS, USPS) And they are FREE at your local Post Office, Five sizes to choose from.

  12. UV or Solvent?

    Get a SUV

  13. Want to buy Graphtec cutting plotter knife blade holder???

    At that price I will buy a couple and give them a work out.

  14. STS Fluorescent eco sol max inks

    I print neon colors on my Seiko W64 printers and I'm down to my last ink cartridge, they are no longer available. Have two Roland XR-640 printers and just bought the new VG3 for the orange color. I will look into the Neon colors for Roland and see if I can change one of my XR-640 printers to...

  15. Re-cutting, starting with a specific panel. Is it possible on a Summa T S2 160 OPOSCAM?

    Nope. I have found that if I have a Large job and it dosent read the barcode the first time, just restart and resend the job. If you are not using barcodes and the sensor does not read the first crop mark, hit the retry button and if it only reads one side of the crop mark, Stop the job, realign...

  16. Question print to 2 printers from one rip

    I'm sending to three printers and three cutters daily from one subscription.

  17. SIGNS 365 BOOT PRINT VINYL PREMASK QUESTION

    Why do you need PreMask / Transfer tape to apply to floors?
  18.

    Printer cleaning - Alternative to Chemtronics Fomatips Swabs?

    I buy these in the bulk pack of 300

  19. LOADED question: What do you charge for printing?

    If they want it now $25 If they can wait a few days when I can run it with something else it's cheaper

  20. LOADED question: What do you charge for printing?

    I take my linear ft price and multiply it by 4 to get my square ft price.

  21. Question Shall I make the change from Roland Xr-640 to a VG3-640?

    I'm running two XR-640 printers 10 to 15 hours a day, they are bullet proof. Just added a VG3-540 to replace our two Seiko W-64 printers which after this year will be used up. So far the VG3 is keeping up. Thanks Roland
Top