• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Feed Motor error 0008

    Power Down, Restart and reload media. Make sure roll of media is moving freely before loading.

  3. Close Front Cover Message

    For a temporary fix: Unplug the switch and connect the two wires together, this will close the circuit. That switch is there for a reason. REPLACE IT

  4. FlexiPrint Sends Job, Printer Doesn't Print

    This problem happens periodically with my Flexi 21. I have found that by shutting everything down and restarting, everything works great again. Also every two days I deleat all print and cut files that are finished. I have found if I don't everything runs very slow.

  5. Recent problems with Signs365

    Over the last 12 months I have placed 22 banner orders with Signs 365 with a total of 550 banners, No Problems or Mistakes. If I have a question about an order I call them before I click the order button and they talk me thru it. They Are The Best!
  6.

    Heaters too high or pinch roller pressure not right?

    Wow! I will always start at the basics now. I totally missed the misaligned pinch roller. The Roland's I run let you know if a pinch roller isn't in its proper place. Thank You Solventinkjet, I won't forget this.
  7.

    Better looking sign

    Excellent
  8.

    Heaters too high or pinch roller pressure not right?

    Thats a pretty bad buckle. Turn down the pre heat and make sure vinyl is feeding in straight and taught.

  9. Cutting ACM

    Yes

  10. Truevis Tr2 Magenta DFW

    Just saw the post. I have one in Ormond Beach, FL 386.295.5072

  11. Graphtec FC8000 Push Roller Replacement

    Wow $500, last year they were $228. Take your time, you can do it

  12. Graphtec FC8000 Push Roller Replacement

    I have fixed two of these. Used two small pieces of ACM one for each side and a couple of small machine screws with nuts. Going on two years with no problems. Just take your time, it took me three tries to get it right.

  13. Sliding Rear Window

    Use a good Laminate

  14. Looking for label material .....

    I print battery labels for a local shop here in Florida. Only 200 a year. No problems in five years. Printing on Roland XR-640 with Eco-Sol Max 2 ink, no laminate.

  15. Rotate nested job in production manager

    If you don't have a 3"tail it will feed past the grip rollers.

  16. Transfer Tape On Mimaki UCJV 300-160

    Try a High Tack transfer tape.

  17. How to print to 2 Mimaki's at once

    I load up one printer with about 98' of prints then load up the 2nd printer with another 98' of prints then the same with the 3rd printer. 1500 linier ft of 54" vinyl per week.

  18. Never made a name plate for office wall mounts before. Any Ideas?

    I just finished some 2" × 8" for a customer. Printed their name reversed out on White vinyl then applied it to .040 white styrene. Slid right into the holder.

  19. Used Aluminum Composite Sign Panel Sheet

    It's Hurricane season in Florida. I give all my scraps and take downs to my friends and neighbors in exchange for BEER . They are happy they have window protection and it doesn't take much space to store it for next season.

  20. Reverse Barcodes In Onyx?

    I will experiment with flexi and my graftec to figure a quick fix.

  21. Fireball Red still made?

    WTF Where's the FIREBALL
Top