Search results

no luck. They said they can not help me with this.

What is the mural made of= general formulation 226 (6mil vinyl) What's the finished size of the mural= 241in wide X 95in high What size trim do you desire= something around 2in X 1/4 thick, anodized aluminum color How is the mural being fastened to the wall= the mural is stick on the wall (vinyl)

Yes. I've even called them to be sure. They only have trims like J-shaped or U-shaped for thick material.

I've found some pictures on the net of how it should look like.

So I've got a customer that want an aluminum trim around his mural. I hate the idea, but he is paying for. I've tried to find a good solution and the only model I've found is a technical drawing. But no information on where I could get them. If possible, I would like to have a source in Canada...

I would love to see your setup. I'm planing to getting one also.

So I have a customer that want some print vinyl to cover his elevator door. Is there anything I should know? I have a concern about the material used (was thinking of a calendred vinyl with lamination) and concern about the material (do I print a 1/2in bleed and push it on each side of the...

Exactly what I was about to suggest. I've just installed regular cast cut vinyl with clear premask on a concret ceiling with a rollepro and it work great. You can heat the vinyl with the premask on it and it work perfectly.

If you go that route, there is less expensive version made by Kala and Flexa.

No one in my area had the 3m models in stock. My install is mainly 3in wide band that is maximum 8ft long. I have also few cut vinyl that are 15in x 72in and 28inx28in. I hope the rollepro will do the trick for this job.

I just went to my supplier and bought a rollepro. Hope everything will work well tomorrow...

So I have a installation tomorrow. I have a bunch of cut vinyl (cast material) that will go on a painted concret ceiling inside and office. I just know now it is concrete (was in the idea it would be drywall). The overall surface is fairly smooth. Does the adhesion will work and can I use a...

Thank you. I've just created an account and their quote is two times the price than going to the UPS store. Maybe they are not setup to ship to Canada.

This is exactly what I'm looking for.

I already have my importer account and fill up my own paperwork. My problem is the shipping cost. If I have a customer or supplier in the US that want to ship something to me, I have to rely on them for the cost and payment of the shipping. I would like to be able to create my own shipping label...

So I'm in Canada and I'm using website like flagship, netparcel and freightcom as a 3rd party for all my delivery. You sign up, put your package details and they will show discounted prices from all major shipping company. I'm looking for the same thing, but in the US. I want to be able to...

can't help. But I'm following this thread.

I've done it before, but I've printed UV+white on fluorescent vinyl. I don't think you can do the other way around. But I can be wrong.

The cut is more accurate on each side of the cutter than the center. With cleaning the strip, I have a variant around or less than 1/32 now. When the cutter scan the two first square (right bottom and right top), it found it immediately. Then it goes on the next point witch is the top right one...

So I've cleaned the cutting strip and pinch wheels and it help alot. It's not perfect, but it is now a sellable item.