Search results

If it was just a vinyl cut, I would understand. But here, it read the marks, then cut accordingly. So It should not be the problem. I confirm it read the right marks. I've printed 20 squares like this and the results are mixed on the 4 squares on the 54in wide. Could it be the cutting strip...

Hi, I've never had this kind of problem before. I have a Summa D160R. I'm making some small print and cut stickers. The circles are 1.5in in diameter and imposed them in a 12in X 12 in square (7 units wide X 7 units high). Then I print four of those square on a 54in material. As you can see in...

I know and understand all that. That is why I'm looking for ''generic'' superhero like the ones found on shutterstock for example. My problem is that I can't find one male and one female character that have the same ''design'' type and in different pose so I could create a story.

That was one of my idea, but time wise it did not work for the customer. The school said it would take 2 months to make the project and wanted to charge an insane price for it.

I've got a customer looking for a mural with a superhero comic story board type of design. I don't want to copy or use copyrighted image. I can buy multiple image to make a story. I've went though multiple sites and did not found anything already made or multiple images of superhero with a...

The best paint is the cheapest contractor type paint. Wait 30 days for the paint to outgas. If you want to be 100% sure a mural will stick, use GARDZ primer sealer on top of the paint.

With the bubbles metionned by Gino, I would definitely say it's a wrong installation. If not, maybe the paint is still outgassing and/or wrong paint.

I've always rolled my murals liner outside without any problem in the last 8 years. I've tried mojave in the past and did not like it. If your friend have stick and unstick the vinyl on the wall during the installation, the glue have tendency to go off the vinyl. But I never saw that kind of...

Hi, I know there is an alternative to products similar to vista systems display in Canada, but I can't remember the names. If my memory is good, there is 2-3 similar manufacturer in Canada. Maybe I don't use the right keywords, but I can't find it here or on google. Thanks.

That is very interesting. I wonder how much it cost?

I'm looking for a manufacturer that make pin stripe that is already premask. In my case, I need a 3in wide blue vinyl to install on a ceiling of an office, a full 50 yards roll. I know that I saw that kind of product somewhere, but I can't remember who. I think it would be easier that way...

I understand your point and I know the frosted will be white and that is ok. If you check the fasara catalog, almost all pattern are white. But I'm also planing to make some test with white + grey if I could end up with a similar look. I understand too I need a very opaque white.

I use the bigsqueegee like you have daily to laminate small piece. Tape your vinyl on a perfectly flat table, layer your piece of laminate over the vinyl and tape the same edge. Then flip the laminate over the BS and remove the liner maybe 1/4 of a inch. Keep the BS at a 45 degree angle and push...

Is there a particular printer that you would suggest to create custom frosted vinyl. I'm thinking something like what is available in the 3M Fasara catalog. Does any printer with white ink would be able to do this if printed on optically clear vinyl? If not, what would you suggest? Thanks.

Just to let you know, if you use the coupon code Doorhof99 you will have an extra 15% off.

I've just downloaded a demo and compared to ON1 2019. The result is far better in gigapixel. I've also check the two other software ''JPEG to RAW AI'' and ''Sharpen AI''. They seems to be also a great addition.

It look like the head is touching the material. Could be just a vacuum adjustment, a feed problem or head high adjustment to make. I'm not a tech, but those would be the first things I would check.

The wall have too much texture for your vinyl. Use Gardz sealer over the existing paint and you will never have any problem with any vinyl. If you have to repaint, use shervin-williams proclassic with gardz sealer. If you install vinyl on a primed only wall, you are asking for troubles.

Drytac will come out with a material especially designed for this. I'm waiting to have the specifications when it will be available.

Do you mean the smalls black plastic roller? If yes, pull the blue lever, take them off and check if one of them is broken. I've had a similar problem in the past and 2 of the rollers was broken. There is few replacement in the maintenance package when you buy the printer.