Search results

I would say that the colour is actually made up of thousands of colours..grabbing one pixel won't work. I thought the same thing way back when my printer weas new and I never could get a bright rich red, and then I printed a photo and the colour was perfect...on closer examination you see that...

Yesterday it was really loud and then suddenly it just stopped with a y axis error. I could feel the head getting stuck by just moving it with the power off. Not getting stuck in one particular spot but random spots. I opened both ends up and it was very clean inside. I manually moved the y...

Just an update...still cuts great but the noise is super loud now. I tried opening the cover but once open there are still the connections to the controls on top that don't give you a lot of room to move around with fear of breaking the lines. Going to try again and see if I can isolate just...

I agree...I have never been dinged for colour charts.

I have on occasions printed on lam. The backing paper is much thinner than most vinyls adding heat will cause buckling or even tunneling, depending on the brand. 2ml lam is great to print on I must admit.

I use a much older flexi program, but have found that when I rip and print, anything grouped such as contour cuts will not get printed unless they are ungrouped. Strange but true

I had it happen to white ford pickups...thankfully the new logos covered it. I thought it was caused possibly from the rubber nubs being worn down to much, but yours look pretty good and fairly new. I wonder if it is the clear coat burning

I changed the other one 1 month ago and less than 1 month the time before and usually get 3 months out of them so it is taking from the one and not the other. I will switch out both Thanks for the advice I appreciate it

Thanks, but my thinking was that you need 2 cartridges and can't just run 1..how is this possible? I just rocked it and it seems pretty empty . the printer says both are at 1 yet only indicates that one is near end and it isn't the one from May. I guess I could just put a new cartridge in when...

I have a low ink warning and when I check the cartridge I just changed it last month, yet the other cyan has not been changed since may!!!! What the heck is going on here? Prints are great and it is a 10 year old jv3 130spII

I have printed on 2ml and 3ml vinyl on my solvent and never any problems. I might say that the backing paper is thinner and you may get the odd head strike unless you latch them up. I have a fleet of taxis I do, and they have a yellow and black checker board stripe along the sides. I tried...

I think the main difference between 3ml and wall material is that the wall material is thicker and goes over the surface better not showing the texture of the painted wall...it also has removable adhesive I believe.. Regular vinyl when caught in a glare looks like bubble hell

Dry ink is OK as the solvents have gassed off in your shop.

\ Why bother with kitty litter which makes more waste...how about just spreading it all in your dumpster and allow all the discarded backing paper , ruined prints and premask and coro bits absorb it..... I don't do that but curious as why we shouldn't as over a few days it will basically...

I had a quart of this stuff and never used it, then a few weeks ago I get this cab in to retrofit the graphics to a new company and the decals on the doors were clear mylar..OMG that stuff just breaks up and heat gun or steamer hardly did a thing. I decided to try this vinyl off and I am not...

The good thing about doing work for larger companies is that it is real work for purchasing to set you up as a vendor... Nobody wants to do more work than is necessary, so if the work you do for them keeps them happy, they have no reason or want to look around and have to reset up new vendors...

The swiffers work well, you just have to change them out as they static charge seems to diminish over time

thanks will look

A transformer blew up yesterday across the street from us and 500 businesses were powerless for over 3 hours. When the power came back my print comp had an issue with windows and would not start up. 6 months ago I had all the hard drives cloned and keep them for just this reason. swapped out...

It's one of those services whereby you can't give them a real price until the job is done... Customers will assume you are adding time when it takes 8 hours legit. I personally hate removing vehicle graphics...even at $80 per hour I can be making more money designing / printing or cutting...and...