Search results

Anyone know of a good optically clear adhesive spray that is also re-positionable that could be sprayed on the face of a vinyl decal for mounting to the inside of windows? The decals are between 3" and 5 " in size. We have them already made but now they want to for the inside or windows as...

I have some decals the are all about 4" x 5" and I want to mount them on the inside of the glass windows. I am looking for a double sided adhesive with a clear for the face side that does not need to be run through a lamination. I would prefer just a peel and stick product. I have been...

I have always has a waste paper can placed right under my printer with the ink pump is located and this morning I found it with black ink in it. I always knew someday day if either the small hose or the pump itself let go it could be a mess. It's not a bad idea to place a small inexpensive...

I received my FREE sample pack of two 8 x10 sheets of Facemount but there were no instructions on how to use it. Is there a certain temperature to reach to activate the adhesive when using a roller laminator with this product? Would like to hear from anyone who has used this product to get...

I need a roller laminator for applying Facemount over stickers which are all under 5" in size. Not sure which laminator to purchase. Do I need the most expensive or something much smaller for this job. Jim

I have a question since I have never used Oracal 651 clear. If I wanted to apply a clear vinyl right over the face of a sticker for mounting the sticker to the inside of glass would I then be able to peel off the top layer to apply it? What I am wondering is does Oracal 651 or any other clear...

Looking for idea's on the best transfer tape to use. Oracal has a 6" x 100 yard Oratape HT 55 but I want to ask before ordering it and finding there is another better product to use with Oracal 651 clear vinyl. I will be using the Oracal 651 to mount stickers to the inside of car windows...

I have some vinyl stickers that have to be mounted to the inside of the glass. I was thinking of using some clear vinyl and just center the sticker on the clear vinyl to apply it. Looking for idea's on the best material to use and also the best way to do it...

I have been using Oracal 3640-G for the past three years with no problems. Just wondering what other vinyls are comparable to the one I am using. Sometimes I have a hard time finding it in stock at a local dealer. I use the 30" wide size for my SP-300 Thanks Jim

My SP-300 usually runs perfectly but whenever I let it sit for a day or two it appears the heads are dry. I manually lower the capping station and with a syringe add a little of the cleaning solution to each cap top. Once I raise the capping station I connect a syringe to each line and draw...

I have owned an SP-300 for three years and I was using it with Windows XP with no problems. I have a new computer using windows OS 7 and was wondering if I am going to have a problem finding a driver. The Roland site only lists drivers for XP Now wondering if I may also have to keep the old...

I need to have a ribbon cable replaced on my SP-300 and the local Roland service tech just contacted me to set up an appointment and to go over their fees. Total charge based on two hours $490.00 dollars Parts $46.85 and the balance is the trip fee and labor rates based on a hourly rate of...

When I manually lower and raise the heads it appears the print heads are not coming up level and I was wondering how to adjust this to correct the problem. Thanks Jim

I must admit that after reading about color management I think my head is about to split. The more I read the more confusing this whole issue seems to become. My printer is an SP-300 which uses Color Rip which is made by Wasatch. I have been using RGB colors for the vector images I create in...

I am using CorelDraw X-5 and when I create vectors I have only been using RGB colors and I send them to my Roland SP-300 in a post script. The material I print on is Oracal 3640-G if that maters. My problem is I am not happy the the red colors in RGB The other colors are fine but for some...

My SP-300 has stopped giving me a warning message when an ink cartridge is running low. I know there are two setting for continue or stop printing and I have it set to stop printing when the ink cartridge is low but for some reason it gives me no warning at all. When this happens I get cross...

I have been using an SP-300 with windows XP but I have a new computer coming that uses OS-7 Will there be any problems with updating the drivers? Thanks Jim

I have a few different syringes I use to draw ink from the bottom of the damper and also from the drain line under the capping station and I was wondering if anyone makes a kit that includes syringes and hoses that you can purchase instead of making up all these different connections...

I have a SP-300 and I am trying to figure out what makes the magenta color back flow into the yellow damper? This is a two headed printer. I just installed a new yellow damper and I pulled the ink from the bottom of the damper and it worked fine. This morning the yellow damper is once again...

I have an SP-300 and I have been using Color Rip for the past three years with no problems at all. I have tried sending post scrip images in CMYK and RGB to the printer and in both cases my images are not printing the correct colors as they were in the past. I have cleaned the encoder strip...