Search results

I need to have a blown fuse changed and this is beyond my scope of work level. I am thinking of sending my main board to Mac Media Corporation for the repair If I can figure out how to remove it without further damaging it. Jim

I upgraded from X-5 to X-8 a few months ago and I thought at first it was just me getting used to the differences between the two versions so I gave myself some time to learn to use it! The amount of times the program just seems to freeze up and won't doing anything other then give a message...

Is this fuse soldered on the board? Do Roland techs change F-2 fuses on the board in the printer or do they want you to purchase a new main board? I am waiting for new ribbons cables for the printer heads to arrive before I even think about trying to change the F-2 fuse myself. The fuse was...

I installed a new DX-4 solvent head and the only problem I had was when realized that one of the ribbon cables was not pushed all the way in so my first print did not show anything for the number two head when I did a test print. My question could that have blown a fuse? Right now it appears...

I am installing the DX-4 print head is m SP-300V The plastic cover that came with the print head has the following number on top of it. 72X383B TWTWVVS R 003..E The head itself has the following numbers on it DSS12328 My question which set of numbers gets inputting into the head...

Which print head is considered to be number 1 when entering ranking numbers is the magenta & yellow? Thanks Jim

Do I need to enter service mode to change ink settings from Eco Sol CYMk to Eco Sol Max. Trying to download profiles and I keep getting the following message. This media file includes a profile that cannot be used with the ink type of the current printer setting. I have been using Eco Sol Max...

I am using Versaworks 5.2 software with Windows 7 64 bit and when I switch to Versaworks it is 32 bit and hard to read. My question is there a 64 bit version of Versaworks I can use with windows 7 to be compatible?

I need to replace a DX-4 head in a Roland Printer and Digiprint has the DX-4 solvent head for $ 544.32 Would like to hear from other who have purchased DX-4 heads from them. Thanks Jim

When you convert an SP-300 to an SP-300 V how and where do you download the updated firmware? Thanks Jim

Will a Roland Tech install a DX-4 head that was not purchased through Roland? Thanks for your help.

I would like to hear from anyone who has connected an SP-300 and made it work with Windows 7 I already have the Versaworks software and I am using a USB connection. I have heard this can be done but I really need to talk to someone who has already done it and made it work. Thanks in advance Jim

I upgraded to Windows 10 home version and as usual with any New Windows product I am trying to find drivers for my printers, scanners and other devices. Is there a Roland Versacamm driver for windows 10 Thanks Jim

I upgraded from Corel X-5 to X-8 and it worked for a few days before I started having problems. When I try to open the program I receive a message that say's Corel wants to get to know me better and to enter my email address and password which I did and each time the message say's the password...

Just wondering because I have now used both and they both seem to work fine with no problems. The difference in cost is really crazy and I am not sure if there really is a difference or if Roland just charges a small fortune for their product. Jim

I need to purchase pinch rollers for an SP-300 but I see many different sizes and they are all very close in size but my question is what is the correct size that printer. When I look online the are all a few millimeters different in size. Thanks for your help. Jim

I noticed the vinyl on the right side is not be held down by the pinch roller and was wondering if it's time to replace the entire pinch roller or just the wheel. I am not receiving any error message about the pinch roller. Thanks Jim

Today my new encoder strip arrived and it is not for an SP-300 but an SP-540 Question can I simply cut it down to the correct size and then make a hole in it with a drill bit or do I need to send it back? Thanks Jim

I need to find a Roland Dealer that stocks an encoder strip for an SP-300 and I have already tried Florida Graphics in Clearwater but they did not have one in stock. I also tried using Roland USA to locate another dealer here in Florida but it appears there are not many dealers left. I do not...

I have cleaned my encoder strip many times but never installed a New encoder strip so I have a number of questions. 1. Does the printer have to be in Service mode first? 2. Is there a spring tension that needs to be set? 3. I do have the Service Manuel for my SP-300 but I did find much...