Search results

Hello ALL, i am running Corel Draw 24 and I am trying to open a specific file I designed last week. Everytime I say open file, when it finally opens it takes approx. 5 seconds and then all of corel draw shuts down. I opened another corel file I designed last week and it seems to be ok and corel...

please explain how this is done in corel draw!

to check print heads... press settings then service menu then enter code 3174 then go to service utilities then scan axis menu then force drop detection. If any 4 digit number on right or left of the slash is higher than 100, then that print head is no good. Sometimes if you run a clean head...

we see this issue often with Ai files into corel draw. you have to break all the curves apart and start deleting pieces of the font and or graphic and you will have multiple layers. Very annoying.

we had the exact same issue with the exact 3M materials.

I have a complete edge 1 with plotter, PC, Omega 4 and many many foils. I am in Northern Ontario, Canada.

what would the lamps have to do with that? they are fairly new.

My HPFB750 decides to shut down and/or restart whenever it wants. Any idea why this would happen?

I agree. there is way to much waste. I throw away litres! Yes LITRES UPON LITRES in unused ink as well as wasted ink. It is sad to see my money go to waste like that! Are other comment saying that you can still print even though the profiler is at 0%?

what is the ENHANCEMENT KIT?

wholly cow! Let me know where you get that one for $2. I want one also. LOL

$3400

I believe we have found the issue! When defining the plate I have to have the "Surface at top of plate" box checked. See photos attached. I am not understanding why this needs to be checked. Searched for explanation on this and can't find any. Can anyone elaborate on this? thanks in advance!

so explain to me WHY " File delva- It's a big D, starts at -1.5 for rapid moves, then steps through in 4 passes, starting at -.925 and finishing at -.7. " and does not come down to touch the material? what causes these measurements?

first off, thanks for the help. It is greatly appreciated. File P-roperties was the one that cut correctly. FYi; " starts at -1.5 for rapid moves, then steps through in 4 passes, starting at -.925 and finishing at -.7. " is foreign language to me. LOL

JBurton, here are the files.

Managed to cut a small plexiglass letter today. Created my file in enroute and it cut perfectly. I then went to nest my entire collection letters, then saved the file but when I goes to cut I am right back to the same problem i had in the initial post above. argggg can't figure out what I am...

I think we figured something out. When calibrating the spindle (in my case it is tool #1), I have to set the grounding block on the black phenolic and NOT the top of the spoil board MDF. Also I did a test cut using one of the preset files the installer had made and it cut exactly as required so...

JBurton, here are the photos

Hello all, i am a brand new user of a MultiCam Graph-X-Cutter CNC machine (4ft X 8ft). I need help with EVERYTHING. LOL I have searched to no avail for any training or helpful videos online so any of you experts want to chime in, please do so!! I am trying to cut 3/16" thick plexiglass letters...