Search results

www.signelements.com, they have high resolution Wrap Pictures including rust.

You mean the Popup-Menu with the options „colour correction“, „no color correction“ and linearization only“? Only if set to „colour correction“, the ICC-profile will be applied. But this will not be an easy way to colour accuracy. The highest level of colour accuracy can only achieved if...

The HP Latex 115 Print & Cut Bundle contains a HP Latex 115 Printer and a separate SummaCUT D140FX-Cutter labelled as HP Latex Basic Cutter 54. The Software is no basic SAi-RIP, but an OEM-Version of what is sold als FlexiSIGN-PRO or (since version 12) FlexiSIGN & PRINT. What means the top of...

Do you set the knife to more depth too? More pressure wont help if the knife can‘t cut deep enough.

HP suggests Onyx Productionhouse or Caldera.

The FlexiPRINT SE Basic RIP should be available for $ 995 (EUR 995 in Europe) . It is the same as the FlexiPRINT HP Basic Edition-RIP delivered with the 315/335, but the regular version with all printer drivers. Supports one Printer at the time, and no contour cutting. Can be updated later for...

The Vacuum Pump of the FB has a separate power connector. Because of that, switching off or even unplugging the printer don‘t affect the work of the vacuum pump, and no ink will be spilled. The power connector of the vacuum pump can be seen between the ink boxes. Check that this external power...

Do consequent profiling is the best way to achieve good greys. If this is not possible, you could give pure hue a try. White this you could force the RIP to print black and greys with black ink only (but with more grain and other possible quality issues). You choose pure hue for black and...

Depending on the version of Flexi you have, there could be some Problems with newer PDF-File-Versions or newer effects in PDF-Files.

Length calibration helps if the deviation depends reproducable from the used media. One issue what could lead to problems is that some people deactivate Autoloading. Autoloading means that the plotter pull some of the vinyl from the roll when loading (and during cutting too if the unrolled...

You‘re welcome.

You‘re welcome

Of course, all what I have explained depends on the version of Flexi. I think this will not work with Flexi 6 or 7. Not shure about Flexi 8.

When creating the cut contours in Flexi, just create two cut contours with different colours (color type, value and name doesn‘t matter). You can choose the colour in the design central when selecting „Cut Contour“ out of the menu „Effects“. When sending this jobs through RIP and Print, you can...

It is a function in the service menu named „flushing position“ or similar. When entering this submenu, the print head will move into the position where it hits the capping. Now you can move the carriage a little bit more to the left, enter, finish. But being careful: whenever the carriage hits...

First of all, it is no good idea to simply cut through (with more pressure than kiss cut), because the vinyl looses stability when cutting holes into it, what leads to mistracking. For this purpose the machine have a functionality named FlexCut, what means it perforates the contours. The sticker...

When calibrating media, you can choose to measure or set a calibration value. If choosing to set a value, you can check too what value is currently applied and note it. Then calibrate the chrome media, and after doing the cuts you can set the calibration back to the noted value. Good idea would...

The i1io 1st generation table needs an Upgrade to work with the 2nd generation i1.

Shure about upgrade paths? In Europe, we can still upgrade Flexi 6.

Older Versions of Flexi do not support OPOS XY or OPOS Barcode. As far as I remember, OPOS XY since 10 (but there are Workarounds for that), OPOS BARCODE since 11, and OPOS BARCODE with the Barcode Server integrated instead of needing to use Summa Cutter Control since the last Build of 12.