Search results

Larger Touchscreen / Easier to use Possibility to print media like mesh without liner (ink collector accessory to collect ink which drains through the media) Possibility to print borderless possibility to print double-sided banner Possibility to create a complete media profile including...

Do you print out of Flexi too? Which Version of Flexi do you have?

Check your SCAN INTERVALL Settings. But most often thats a problem of the network

Flexi 10 is not able to handle transparencies, you should try Flexi 12 for that. But forget the EPS File format, can‘t be used with transparencies.

Because you don‘t use the native ink for that printer, it could be difficult to find a matching ICC-Profile. And, for Photoprint, you should provide your version, because of the manufacturer of that software has changed his ICC-System twice since the time the FJ-52 was new. Regularly, if...

What Software do you use? Could be that the software overwrites the values set in the cutter.

Port 3 your PNC was connected to, was that Com3? The printer needs Lpt-Connection. Both interface types could have the same connectors on PC-side (25-Pin), but aren‘t compatible. And, be shure to have a parallel port which supports ECP-Mode.

Why not having a look on a Latex Print & Cut-Bundle? HP Latex 315 Print and Cut Solution | HP® Official Site With this you get a HP-branded SummaCut D140R and a complete FlexiSIGN & PRINT-Software for very low additional cost.

Grain prints can happen if the heads or the feed aren‘t correctly adjusted, regularly it works fine for doing decals. Have a look on one of the print and cut-bundles, a highly integrated print and cut solution.

Totally outdated. Is the right price.

Strange: regularly the RIP-Software should set the command to switch to OPOS BARCODE into the plotfile.

Could be if the sensor gives back irregular values. I would give calibrating (or setting the Value higher than it is) a try. Regular value is 30, try it with 60 or 80.

Be shure that the pinch rollers and media is set in a way that the sensor can reach the complete barcode. If the right side of the barcode is out of the cutting area, the sensor can not reach the complete barcode. If you have a very small border, use "extended loading" to set the cutting area...

The first generation OPOS-Sensor (the one with the red light) was established in 1995 for use with screen printing, and is really weak in recognizing marks printed with low density inks, or marks on laminated prints. This Sensor is used in the SummaSign- and SummaCUT SE-Plotters, and in the...

Often bad tracking is because of the pinch rollers are worn out. They are easy to replace.

We had customers with that issue too. 3M for example recommends to don't apply the prints right after laminating, but let it stay for a day or two. And of course, be shure that the print is cured before laminating.

Could you please post a nozzle test (Button TEST PRINT on the keyboard)

Flexi 7.7 is the latest Flexi 7-Version, so if the driver is not shown in the drivers list, there will be no driver available for the 1204. No possibility to add it. As far as I remember, the driver is available since Flexi 8.

Just place the middle pinch rollers beside the grit rollers (metal rollers in the platen), in any other than the marked positions. Then they will not be lowered down on the media. Don‘t use one of the middle rollers on the left or right edge of the media. The outmost pinch rollers have a...

If the ink is really dropping out of the nozzles, then you can be shure that air gets into the system somewhere.