Search results

I have spent many happy days at Road America and Elkhart Lake over the years. I rarely miss the Vintage race weekends- and sport a 'Remember when Racing was Fun' decal on my cars with the Can-Am Challenge Cup logo. Used to see all the top guns in the sports car world at Donnybrook Raceway...

I was just thinking about this yesterday, actually. Does it look anything like this?

I resemble that insult. Thank you so very much. Gene :noway:

One of my suppliers was parting out an old Roland for the rollers- the rest is 80/20 extrusions. Works great BTW

The RF640 (which we have) is a VS without an onboard (contour) cutter and with dual cmyk cartridges. The head is more expensive but it is much faster and has a better media handling system... with certain limitations. It takes longer to load and reload the media- my solution, as we use 90% one...

We ran a VP540 hard for 5 years and it was rock solid. Replaced one cyan head in that time and cleaned no more often than every two weeks... I would say that every four weeks was more average. The shot counts and hours were enormous when we sold it for almost half of the new price. We used...

A. They are lyin' B. They are in Pensacola not Mpls C. We din't do em' Hehehehehehehehehehe :thumb:

What it comes down to is you have to figure out what your unit cost needs to be so you can eat three times a day, pay your bills and have a warm place to sleep. I would also add a little something to insure a fun, exciting and extended retirement. It sneaks up on you faster than you would...

Exactamundo. I was questioning the spelling of milliliter BTW it makes my old eyes chatter. :pops_blinking:

We do too- altho it is 10 mil... not milliliter (that does not look correct, but I checked it). :Big Laugh

Check my thread- http://www.signs101.com/forums/showthread.php?124522-More-issues-with-Versaworks-and-Roland-spot-colors and see if it is what you are experiencing. I am working with Roland tech thru my local tech on this problem now. And it does seem to be the darker colors. They sent me a...

I have never understood how this works (360x720, 540x720, 1440x720 for instance). How do these differ from 360x360, 720x720 etc. I am trying to resurrect my old i1 pro (it actually did the diagnostic test fine- the resurecting would be digging the old info out of my brain). Thanks Gene

Shouldn't we talk about Jade Helm 15? I ain't goin' to no abandoned walmart!!! :noway:

The correct cmyk is the library colors- for some reason VW is changing the mix of colors. This happens sporaticly- I am suspecting that the program may be corrupted. I have been fixing this on a case by case basis but will spend the time to reload the prog on the weekend and see if that helps...

So... some spots are sent to the printer wrong as below: Notice the difference between Library output and printer output

Banner material is pvc. Coroplast is polypropylene. Gaba- my supplier will not take 54" so we cut them into 24 & 30" and they are happy to take them. Gene

My renter got a recycling dumpster and we may have to have it picked up twice a month instead of the current once. Paper waste, cardboard, cans, bottles most plastics (it is one sort). It really takes the load off our once a week dumpster and way cheaper- $40 a month I think. If we fill our...

Picked a spot from our chart and got a completely different color... so started poking around in the file format section and then the spot color detail section and noticed this: (Pict) The Library Output is correct but the printer output is quite different. I have been checking different...

:banghead::banghead::banghead::banghead::banghead: Coulda swore that was the first thing I tried. :covereyes::covereyes::covereyes::covereyes::covereyes: Thank you, Sir

The font id section of my brain is shrinking now that I don't use them on a regular basis. Thanks Gene