Search results

See above; the problem is somewhere between the cap tops and the drain bottle.

CheetahWraps should sell it to ya by the yard.

I wouldn't buy a thermal printer as my only printer. And, you still have to laminate thermal prints. Call your local suppliers and see what types of equipment they carry and when they have equipment demo's coming up. If I was buying my own equipment I would buy an Epson printer, Mimaki or Summa...

Our Summa did that a while ago, I think that the language setting got changed in either the plotter; Composer, or device driver is what it boiled down to. (HGPL/GPL/whatever setting somewhere) I can't remember where the tech made the change anymore...

Sounds like the calendared has shrunk a bit since the install; and the surface wasn't prepped properly before painting and it has pulled the paint up with the decal off of the door surface.

wow, never would have guessed that. thanks for the follow-up post.

If you're not up to the task of PSing this, I would highly recommend subcontracting out the design to someone who is. I've only done one wrap approaching that level of change, and it was a big PITA; full wrap interior and exterior of an ambulance.

We have a lot of vinyl/mask/lam slit currently at one of our vendors and it causes a great inconvenience with all the trips there & back. We are interested in adding a vinyl slitter here at our shop; does anyone have experience with one or have a vendor that sells them here in the US?

I don't use any special profile here for 680, we set up one for 180c and try to use it on everything we print on if possible. that way if we have a reprint we don't have to worry about which profile we used.

You're probably going to have to PhotoShop this up yourself. You're going to have to go take some of your own photos of logs/boards for the wood, and then construct your own cabin, and then add some faux snow effect. It'll be a LOT of work. I would estimate 15+ hours of PS work and a few hours...

There are a lot of fonts out there that are flourishes like these. http://www.dafont.com/theme.php?cat=710

Good luck! Seriously, we recently have been looking for another employee here and only about 2% of the resumes we have received passed us "pre-screening" them and doing background checks. I would suggest posting on Craigslist and also posting on linkedin, but otherwise; I'm not sure.

Fellers sells us 180c 15" punched. You can use an edge foil like GoldMedal to get a gold chrome look.

IF anything could work it would be 3M IJ680CR. I would do a solvent print and laminate it with a real thin gloss laminate.

X2 on the plotter doctor

I would use 3M180c-black vinyl. No need for 1080 black on a box truck.

You really should laminate them, some colors only last a few months outside w/o lamination. We have been using Edges here for ever and we always laminate the prints.

Can you still see it after lamination? If so, it might be the head going south soon, or just needing cleaned.

There is a little (RFID?) chip/counter that is behind the label on the EdgeFX cartridges. it isn't 100% accurate. The standard Edge foils have the length remaining printed along one edge of the material.

So, what does that lower the price to now?I haven't priced Rolands in a while.