Search results

Does anyone have an information on this Mimaki error message: Error 43 Y Current I know the suggested remedy is unplug the machine for awhile and try it again, I was hoping someone knew what might be causing it or what it might be leading up to. Thanks!

OK, I contacted Ivivid, since I didn't know where to purchase their paper, and they told me you can get it at LexJet. Well, I called LexJet and they carry some of the Ivivid products but not the gloss paper because they have their own line, which is that Prime Gloss SUV. They went on to explain...

Where do you get the iVivid paper?

OK...how about GMI paper, has anybody used that before? It was recommended by a local supplier but I believe it's only a 7 mil paper. Opinions....anybody

Well, I'm sure you know this but the manual says: ERR51 PINCH POS* Pinch rollers are not properly set on the grit roller. Set the pinch rollers on the grit roller. If you have already insured that they are in fact positioned on the grit rollers then I would suspect there is a problem in...

I just received a catalog from LexJet, whose materials I'm not too familiar with and aren't carried by my regular suppliers, but they seem to have a nice paper called Prime Gloss SUV, which is 10 mil at the average cost of .26 per sq. ft. I know I've heard someone mention this paper previously...

I have also been using Sihl Trisolv 3686, which is a 9 mil 200 gloss paper, at an average cost of .17 per sq. ft., but I've been very dissatisfied with the product lately and have had customers refuse delivery on some orders. The problem seems to be in the irregular coating of the paper. It...

Dan....you won't include the source? That was the whole question..... Good thought Doug, as "carpet tape" is basically the same product though you're probably never sure exactly what you're getting. Thank you Brian, another good referral as TechnoCharlie was instrumental in my using the...

Does anybody have a source for a good quality economical double sided tape for router use? I had been using some Intertape 592 in 2" version but I can't seem to find any anywhere now, except one place that is super expensive. I'd probably be looking to step down to a 1" tape if anybody knows a...

The tools you are using, the materials you are using, the suppliers you are using are all arts and crafts hobby grade. I doubt anything could be recommended to you here. You should search out information from areas that deal with similar equipment and procedures. See if you can find a forum for...

No..no...no...Matt my dear friend...I know you wouldn't joke about something like this but is this truly confirmed...it's unbelievable...

Soak the heads for a couple of hours, then clean cycle, test print. If it isn't good then do it again.

I desperately need a number of new websites and I don't have a clue. I need a standard website and an e-commerce website at least. I would be happy to drop it someone's capable hands at a fair price but from everything I hear from everybody, there seems to be so many variables and different ways...

Larry...I'd be curious to know if you could briefly outline some of the pros and cons of the Shopbot vs the Multicam since you now have good experience with them both. Thanks!

I agree...absolutely not

If I may, let me tell you about a day in my life at Gerber... Today I spent the morning wrapping up a bid for a contract that I spent the last two days preparing and drove an hour away for a 2 hour delivery process. After that torturous affair, I realized that I was only about 10 miles from the...

Doug..I've never tried Lexan in the router but I'd agree with Fred's advice. My router's maximum is 54 IPS and from my instinct I'd definately not start out higher than 100. I do have some lexan on hand if you wanted me to try something but I guess you could trial and error just as well!

I guess there is the proof that automatically restoring or reformatting your hard drive or reinstalling your operating system before thinking is a bad...bad...idea.

Thank You!

Now there's a couple of olive branches!