Search results

love to but i'm over here in Belgium, so s&h and import will kill your super pricing. I do love your website with top blog, very helpful!

Yeah, i'm thinking too that magnetic could be an issue, but then again that YT movie shows that it could maybe be doable. I'd love to test it but I'm hoping that i may find an alternative holder and blade so i at least would be able to test it, knowing that quality or blade wear will most likely...

Oh just for adding it to this thread for other signadepts to easily find, heres a YT from another cutter make/type which shows this: Cut magnets with plotter cutter

Very helpfull. Now my next quest would be if someone knows a good place to buy such blades and bladeholders (may be low’ish quality as it would be for testing this). Thx all for the help and advice.

Very helpfull thx!

Hi Peter, Maybe Digiprint can help you? if not in their shop, contact them, i had some luck a few times with other parts that they managed to get hold of them. If not you could and it's a mainstream part Summa uses then you can get lucky as RS

Hi All, As my subject implies: does anyone (has success) cut(ting) magnetic sheets with a Summa? I have seen some YT movies showing this for other cutters so my gutt tells me it might be possible? Thanks for any help with this one. Ray

Flexi. Reason: because it was bundled wit the HP 31x series. Works with my HP 315 & 310 Latex and D160r Summa cutter. Let's say its not bad at all. Contourcuts even cuttroughs work, but i still set the force on my Summa itself. I do it because for each media it's different and tends to change...

Hi guys, i’m doing a bit of print and sign after workinghours and use a gmp 1080. I have more wider printouts to laminate or mount and im looking on the current available used machines on std classifieds/auction sites and right now i have two possible offers: seal62 base or gmp excelam 1600rs...

Jup, had it happening last week. It's quite easy to fix it. i'm by no means an HP Tech, but i wouldn't leave the printer too long without fixing it as i guess it could give extra problems (air in ink? ink drying?). Thx Balstestrat for the solution.

I had a Mutoh VJ1304 and compared to an HP Latex it feels a bit the same. The only downside of a latex is when putting its print next to a solvent or uv print. Those have more resolution. But then the latex is nicely ready to use the second it's printed and is fairly scratchresistant. I don't...

I cannot agree more, the Summa D series has me stumped at how small you can cut with these with really good accuracy (ok, ok, i would lie should i not tell you that now and then i do have soms quirks with them, but honestly that's with about any make/type that i ever used). I feel these cutters...

Hi Frank, Superdanke fur deine hilfreiche Infos. (That's superthanks for the Infos)

Hi All, i have an option to buy a used S160T. I currently have a D160R. An S2 160T isn't a real option for my budgetwise, but since this S160T is crossing my path i'm really tempted. I'm just wondering what the difference is between the (original) S160T and the S2 160T? Thanks for any insights...

I think the 1400 feeds its ink directly from the cartdridges which reside on top of the printhead itself. On first startup it will do its init procedure and do a cleaning to fill up the printhead with ink. you should be fine, even after so many years :-)

Care to share your issues? I have multiple Summa's and have a bit of experience with them?

This is an ooooooold thread but i just wanted to add to this thread some extra info, just in case anyone encauters the same issue as i did and a possible solution that worked for me: i had exactly this same error happening with a D120R and using flexiprint. Solution for me was to play with opos...

looks to me like hpl trespa material? Corners have been routed?

Thanks, i know, but i love to replace a defective part instead of replacing more than needed if it's possible. Thanks for any more tips.

Hi all fellow HP-adepts, I have a slight issue going on. I have an endcap which has broken off off the spindle (see pics) I ordered the replacement parts according to Digiprint. But i cannot seem to figure out how to unmount the broken one? Has anyone any experience with this? Thanks for any...