Search results

I have Corel X6 but just couldn't get my contour cut path to work in my RIP so I went back to X5 because I have no problem cutting from there. I have checked every setting in X6 and compared to X5 to be sure they're the same. I have checked my preferences in my RIP, I have followed the 2...

I've never done a full vehicle wrap although I've been applying vinyl for many many years and since the clear coat on the roof of my 2001 Crown Victoria is beginning to peel, I thought this is a perfect opportunity to get to it! I just can't make up my mind if I want to stay close to the same...

I have a client that is needing 10 4'x4' signs attached to those "portable" skids. I just wondered if anyone here could give me an idea of an approximate "build time". I have the cost for the lumber and hardware but I'm not quite sure how long it should take to put one together. Thanks

Well this is a new issue for me. I usually use PDF files with a cut path in Wasatch (I run Wasatch 6.3) and have no problems. I sent a small print file as an EPS with a cut path, printed it and it never put the file in the cut queue. I sent the same file as a PDF with the exact cut path and in...

Does anyone have a vendor that sells Pearlescent Digital Print Paper? I had a roll and just ran out and can't seem to find it again. 36" roll was what I had. Thanks

I have a client that wants portable No Parking signs with a plastic base that can be filled with sand. She wants to bring them inside at the end of the business day so she doesn't want anything heavy. Anyone know a place to purchase? ...Or other ideas? Thanks!

I need help creating a CutPath in Corel X6 to run with an older version of Wasatch (6.3). My CutPath worked in all my earlier versions but for some reason since I installed X6 upgrade it won't work. Any suggestions? Thanks

For the life of me I can't seem to get a CutPath in Corel X6 to work in my Wasatch 6.3. This is only since I upgraded to X6 all my earlier versions I never had one single issue. My CutPath from X5 won't work if I just open that pallet in X6 and if I try to edit/rename a color and start typing...

I have Wasatch 6.3 and just installed my upgrade to Corel X6, I set up my CutPath that I always used for a print/cut contour file but now isn't showing the little "marching ants" when I open the file in Wasatch. I haven't had a problem with earlier Corel versions at all. Just wondering if...

:Oops: I thought I had all my decals cut in a large order I'm doing and it turns out I was wrong. I'm running Wasatch 6.3 and was wondering if there is a way to send only the cut portion of a print/cut file so I don't have to reprint the entire batch of decals again. Thanks in advance.

I am going to be moving to another location in town and wanted to know if any of you had some advice, do's and don'ts for moving my printer. Thanks in advance!

Hi All! Haven't been here for a while...that's a good thing, I've been busy! I was wondering if any of you know if there are any sign substrates that are made and produced here in the USA? As far as I can tell, China pretty much dominates the substrate market. I have vowed to only buy American...

Is there a specialty vinyl made for applying to fabric awnings? Any special prep involved? I have always applied vinyl to vinyl awnings and just never had to do a fabric awning. Just want to be sure I use the right thing. Thanks!

Hi! It's been a while since I've been here...good I guess, everything has been going well...until a minute ago. I have a Mutoh 1204 valuejet and I am printing the second side of a 2 sided banner. In mid print I get a message that says "End of Roll". I have at least 8 more feet of media before...

I have a client that sends me PDF files from Adobe In Design. They are vector graphics but instead of showing as plain objects they are showing as "symbols". So I go to "Edit Symbol" but I can't convert the symbol to an Object, (that feature is greyed out). I'm supposed to print and cut some...

I had to get a new computer and was running Wasatch 6.1 with everything running great. I reinstalled 6.1 but my graphtec cutter won't show up when I setup the unit options. Wasatch tech couldn't figure it out and had me install my 6.3 version. A bunch of my profiles aren't working (the ones I...

Wow!I didn't realize it had been so long since I visited Signs 101! I am in need of the best advice around so here I am! My motherboard in my computer went out so I bought a new computer...has Windows 7 loaded but an option to downgrade to Windows XP Pro (which is what I previously ran). Luckily...

My internet security recently expired so I renewed and have been waiting for a new license number to be e-mailed to me (AVG). They are 4 days in doing so and of course I got some viruses on my computer. To make a long story short, I called the guy I use for computer problems to help me out and...

A customer brought a file to me on a disk that he created in Corel X3 which is what I use. I tried opening this file on 3 different computers that have Corel on it...2 of the computers wouldn't read the CD and the one computer that did read the disk had an error that the file format wasn't...

I just started printing a small job, 30 4"x 11" decals and noticed the print head is hesitating for a second or two in both directions (in bi-directional mode). The print itself is fine, no banding or anything like that. I can't tell if the data is slow getting to the printer or if there is...