Search results

It's beyond frustrating and we've essentially had this issue since day-1 with this printer. And we bought it brand new out of the box but it was sitting in the resellers warehouse for years in original HP crates and packaging. I'm trying to find a how-to video or book on how to do this.

I've had these thoughts but there was a comment from our reseller/service provider that mentioned that, quote: "Judging by the pictures, it looks like there isn’t enough heat getting the that one spot. This is most likely due to dust etc trapped inside the curing module. The only way to fully...

I think you've misunderstood what I tried to communicate. On the HP I do test to limit my ink with the built in method which usually is around 80 to100%. Then I often will further ink limit when I linearize further in my rip software. The rips software refers to total ink limits in cmyk 400%...

It is pretty darn slow. I only run the 380% on the PET film as it seems to carry the load. On vinyl I have it backed off to about 200%, 12-pass. We put a heat laser on the media as it was coming out of the printer and noticed a wide spread of heat. In the hottest spots the media was at about...

All medias, but most noticeable on PET films and Vinyls that cannot handle high heat. I've been runnning a PET film at 80 to 92%C, 16-pass and have reduced ink limiting in my profile to 380%

I haven't adjusted this either. I just ran a banner and increased it from 175 to 200, I can't really notice a difference yet. The media still bumps up in the same area which leaves a dull area in the finish.

I've been having difficulties printing to this machine for a while. I've been researching all options, have changed media's etc. Looking at settings and does anybody have knowledge about adjusting Heat Airflow Pressure? I do notice that most of my media profiles are at 175 mmH2O. What does...