Search results

you can get it direct https://www.cadlink.com/ PB

looks like to much tension on the rollers and too loose on the laminate when dropping the rollers you only ned them to touch the media back tension on the roll of laminate is key, you don't want to see any ripples as it unwinds some laminates silver more than others, normally gos in a days or...

update your firmware

hi it will be the cutter offset only use branded cutters

what program and version are using to drive studio 2?

hi Looks like ABET or CORIAN sheet with UV printed text and braille alternative is to use 12mm and 5mm Perspex PB

keep the job in house charge for travel, overnight stay etc look at the bigger pitcher

HI I the wall has failed the peal test we recommend re painting the wall with zinsser primer sealer https://www.thepaintshed.com/bulls-eye-1-2-3-primer?_gl=1*12tni8h*_up*MQ..&gclid=Cj0KCQjwveK4BhD4ARIsAKy6pMIWyke-dr86AAovRQ7TKfzmTGKBONV2ObeBe_8WSVizlsVXo_4h_LoaAscsEALw_wcB

use two sheets fold each one into a tray, fit trays over steel frames and fix to outer frame PB

hi may help, just dug out old solljet pro ii sc 540 codes 0102 // head lock sensor error. // head lock sensor broken or loose 0105 // tool carriage connection error. // look at limit sensor 0106 // tool carriage disconnection error // limit sensor broken or loose good luck PB

https://alggraphics.com/finishing-solutions.html PB

have you considered lorry canvas side material, Avery and 3m both do a product

HI in the rip, click place alternate, once you have tiled the image PB

that will be down to your overheads and profit margin

you can't hot swap colours in and out of any printer, especially the VG range it runs a pressurised loop ink system so to change the colour you will need to flush out the system each time, this will cost a small fortune and really not worth it in addition, I think you can only have one...

HI If you are upgrading to the VG3 make the jump to the VG640, you can when print 1500x3000mm board in one go, and the media price for 1600mm roll and 1370mm rolls are almost the same price I have one supplier who's polymeric are priced identical regarding the ink think very carefully about...

not 100% shore what you want to do is the program outline set to dashed lines rather than a solid line? 1: pen the original file in signal, re save as a file in a different format 2: open the PDF in illustrator and change the file that way you want it PB

The main gases in the air The table shows the proportions of the main gases in dry unpolluted air, nitrogen 78.09% oxygen 20.95% argon 0.93% carbon dioxide 0.04%

Polycarbonate - will emit a yellow smoke and toxic fumes. any responsible company will not use a laser to cut polycarbonate and endanger employees lives

We may have a small Gerber machine for sale soon has a 48"x 24" cutting area 3hp router 3d AMC controler We run sign-lab PB ps, you can't laser cut polycarb it is class 0 fire rated,