Search results

SUMMA S ONE D75 LET ME CHECK IN THE PANEL ITS NEW FOR ME THAT. I SELECT THE FLEX CUT IN THE GOSIGN SOFTWARE, IN THE SAVE JOB SOME PARTS ARE KISS OTHER THRU-CUT. THANKS

I DONT KNOW WHY THE KISS CUT PARTS ARE CUTTED LIKE THRU CUT, THE SETTINGS OF FLEX CUT IS OFF IN GO SIGN. THIS START YESTERDAY. WHAT I CAN DO?

Looking for a main board for cg130 srIII? where I can buy? thanks

FIND YOUR PROBLEM? HAVING SIMILAR PROBLEM WITH SUMMA ONE, DESIGN,MARKS AND CUT LINES ARE PERFECT ALIGNED BUT THE PLUTTER IS CUTTING LIKE 1/8 OFF FROM THE BEGINING. ONLY ONE WEEKS WITH THE SUMMA VERY DISAPOINTED ,EVERYTHING MORE COMPLICATED TO WORK WITH THE SOFTWARE, MY LAST PLOTTER WAS A MIMAKI...

You tried doble table setup to avoid bowing?

Everything oem is a new s one , never happen before with my mimaki (similar blade holder type) using the same material.

I having similar problem but is the blade slide out from the blade holder (stuck a little bit in the thick laminate . The vinyl is flat ,using tables both sides. I can see how the blade stay out sometimes at the first blade touch before start cutting .

YOU ADJUST THE PRESSURE OF FLEX CUT IN CONFIGURATION SECTION IN THE DISPLAY. FLEX CUT PRESSURE ADJUST IN OTHER SECTION

ANY PLACE TO SEND THE MAINBOARD TO REPAIR?

2 years old mimaki cg sr III shut down like you disconnect the power. I tested the switch,power cord and power supply (good) . any Idea of the problem?

The icons of fine cut are not present. Using coreldraw with finecut plugin, all the tools are there but with out icon, if I place the cursor over the tool i can read with one is, but i have to go one by one to find the right one. Any help!!! Thanks

I run a malwarebytes and i file find making all those problems, Now is fast again. Thanks for the replies!!!

Working in some design and notice the problem is everywhere, not only rasterlink, the complete computer is runing very slow.

Good Morning!! After lost the power of the shop last night the rasterlink is working very slow to transfer files to the printer and to import from files too. I use corel to design and is working good, the internet and other things are working good. Any suggestions? Thanks

I would like to know what software shops are using for receive orders, Looking for something can move the status of the order from ,ordered,in design,to cut ,shipped something like that, any advice will ne appreciated,thanks

The one I using is working good but I just looking the perfect match for some motorcycles plastics.

Rasterlink

I would like to purshase one already made from anyone . I don’t know how to . thanks for reply

Looking a icc Profile for substance x1 digital media for mimaki printer jv150 8 ink set up. The mfg only has for std cmyk setup. Any help will be appreciated.

Thanks! My cut software I can cut by layers, what I want is group the two layers of every part in one group each piece for send to ecut to nest. After nest duplicate and delete the design and end with my cut only layer of all pieces . Right now I group all piece one by one before nest. Today...