Search results

The design called for mostly red but the saturation was set to minimal coverage, high speed

it shrank back from the cut line in the image, didn't measure how much used the exacto handle as a reference The imprint had a 1/8" "no bleed" from the print edge to the cut line to stop it from curling. printed Roland OEM Eco-Sol - speed ink coverage. This is non-laminated

+1 This right up Rick's line of expertise

Luckily this was not installed before the issue was noticed...... as it only took the vinyl 4 hrs to reach this state That is a handle to an Exacto knife for reference....... and yes there was a 1/8" no-bleed area Material is MPI 2120

it looks to uniform to be static, would start with a nozzle test then an alignment test

2 people does make it easier. HOWEVER the most important point no matter the size is to ensure that your table surface is PERFECTLY LEVEL....... cannot stress this enough

+1 polycarbonate (lexan) allows you to do these larger pieces without the seams

you will have to contact the city code office and verify the needed height. for us there is a 96" clearance

we have been playing around with designing / building a system like you see at Home Depot or Lowe's for the carpets or floor vinyls. They press a button and it rotates till the material you want comes around and stops at teh desired height to enter the machine. Granted this only works on rear...

http://www.signs101.com/forums/showthread.php?118364-Source-for-wrap-templates&highlight=vehicle+template

So much for that christian attitude of putting other before yourself. We have a board on the show room wall that lists all the policies; Productions starts the following business day from deposit receipt and layout approval, it also states standard production is 3-5 business days depending on...

since you are going for the "apple" feel, use the color of an apple's inside as the "sold hear" color. Since you are using the skin color for the main copy. This will keep the subtle color but add just enough coloring for the people who as looking to find it easier.

http://www.grimco.com/Products.aspx?cid=0063

this covers it

this is the only option I know of that is thick and matte. 3M 3647 19 MIL MATTE OVERLAMINATE however, there are several brands that are "luster" finish and thick

with the rivets you will need a roller wheel http://www.rollepro.com/

I know I have seen this shape before as a blank, but can't remember where. Any advice would be great.

+1 we use this method so we don't have to carry so many different medias

https://mysolar.cat.com/cda/files/335323/7/ Page 5 you will have to have both the coated and uncoated PMS color books and do testing to get the exact match.

what is your intended customer? Industrial - B2B, larger orders but have to go get customers since not in high flow traffic. Mini-Mall - more visibility, more constant customers, however, small jobs, single stickers etc... IMO go with the industrial location and the bay door, this will allow...