Search results

part of business. Treat it like a gift card.

I would also add get of rid of cor-hell. Hire a IT person to get your graphtec on the net work.

I am very surprised you have to use a thumb drive at all. If the machine is newer that 2010, spend the $300 for the network port. Also make sure you have at least .5 inches above the bar code on material. The other thing that helps is when you load your material roll it to the half way...

Look at stratojet, with 2 sets of cmyk heads you can print a 4 pass 4x8 sheet in 7 minutes. Not blazing but fast enough. And to my surprise I have no complaints about print quality with 4 pass. I did not think I could make it fit, but I just got rid of everything that was not making us...

The private run forest do not burn up. How weird is that?

Are you trying to be retail or B2B? If retail, then facedum may be a good option.

It is never too late to buy real estate. Make sure you always charge market rates and then some for rent. You will need a separate llc for the building. I bought our building in 2005. The morgage payments are about 20% of market rent rates today. I let our cpa initailly treat the morgage...

Have your tried calling Graphtec? They were very helpfull when I called 10 years ago, and spent a ton of time helping me resolve the issue. (operator error fyi)

Flexi?

You are right, they most likely built this in Photoshop. Have them, not you, save it as a optimized PDF. That might help.

It sound like a tired door switch, Have you just tried putting a paper spacer over the switch? I have seen this on several types of machines.

Finaly bought Tesla shares, been following musk for 15 years, augg a bit late. However I think GM will be gone in 5 years, Tesla will also be a utility power company. I think the stock is a good value. Also I think a most of his cars will have an average 30 year life span. Much simpler...

It does sound like something is timing out, or some other setting is off. Can you call tech support and ask them? For sure, check your power saving settings. I think I have all my computers set to be always on and never sleep.

Can you send it over pre-paginated? The down side it might rip longer or forever. There usually 2 settings that can effect this. Find both of them. It looks like you found one. Also if you are sending over a PDF, then make sure the bounding box is set to trim size.

We were able to retire our white option by changing it to a cm, and buying an additional head. On the pre-pagaination, there are many reasonable software solutions. For less than $300 per seat we use Montax Imposer Professional that we have installed on 6 computers, and is used constantly...

It was plenty close for our use. Although 10sacer, I will note your idea. I used stamps.com and printed that to a PDF, then added the pdf background. Merged that with a single common front. Then laid it out on the 48x96. The only problem was I did not check with the po if that would be ok on...

I just printed 201 6x9" postcards on 4mill coro 2 sides. around 60 up per sheet Side 1 bleed to edge, no gutters. Side 2 the mailer side had about .375 white margin. It cost .83 for postage fyi. I had to use 6 pass slow for the address side and took about 45 minutes for both sides. We...

I think you will find a 4x8 is going to be the same price. You will need to have a service person near by on phone stand by for the life of any machine. Budget about 100k

Very happy my mom was pro life, and as well as everyone reading this.

ok to kill a baby, but not a dog