Search results

I just did all the upgrades. I am still getting just 4 marks. I am sending a pdf with 256 labels on a 47 x 20 ish file size. Any ideas?

Mirror Could you just hit the mirror key for each page, then print ? I just took a pdf, (a small one) and brought it into id, hit the mirror key, then exported back out to a pdf in a flash. It could be the print function is in adobe is buggy. What about using the rip to mirror it ?

Umm, sheet vs roll, I will look for that, I have only had this since July Will report back.

Thanks for the comments, On the hp you can set the temp to whatever setting you want for a particular job (at least with the onyx rip). I wonder if you could just use standard heat transfer material, and turn the heat down to below the melt point, and let it air cure?

I have to print 51 sheets 54 x 36 of the same file. I want separate register marks for each sheet. Is there a way to do this automatically, like with a script command?

Will this machine work with heat transfer material ? If it is does who sells it ?

It is the substrate. I tried all the so called fixes, and all the problems went away after I changed to a substrate that does not warp or S under 200 plus heat.

I just ran 50 prints of a 54 x 30 ish sheet with 48 .5 x 1 boxes that had to be cut out. All ran very smooth after I changed to a stable subtrate, like 3m. It was like night and day. The cutter is the graftec My only question is how to I print 50 copies and still get 50 sets of cut...

:thankyou:Where can I buy a substrate to make a heat transfer for the HP 25500?

Newbe here, Is it possible to make a Heat transfer image off a latex machine? If so who sell the material. I have a grafphtec cutter. Thanks!

I had several of these issues also, but most went away when I started using a 3m substrate.

I just did my first big cutting job, or for me big, 50 sheets of 54 x 30. It took me 3 weeks to figure it out, and about 2 days to do the job. Short answer, use a good 3M substrate or better if you have to do cutting. Hp has a firmware update to correct for bowing, and onx has a plug in the...

Has any tried to print on both side with the hp L25500?

What is the best rip for indesign files What is the best rip for indesign files or pdf work flow?

Does anyone know of any rips that produce a pdf, the client can sign off on? We are looking at the hp latex and looking for the best rip.

Correl I am new the sign world, but in the print trade correl is somthing we avoid at all costs

I run a small commerical print shop and plan to install a hp latex printer. We are not a full sign shop, this is just to meet the requests we get with print orders. We use a pdf workflow, and I would prefer to stay with it. Perhaps it is not as a big of deal with signs, but I really like the...