Search results

Is this what you are looking for? http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=&cs=04&sku=101210-4&dgc=ST&cid=293344&lid=5616479&acd=12309152537461010&ven1=sE1inYhPj&ven2=,

I am looking to buy my first laser, I have looked around, and am thinking of this one from Full spectrum. https://fslaser.com/Products/View/7 Currently we do not have any demand for this, but we think it is a good next move. We do offset printing, digital printing and have 2 hp latex...

sleep mode too If you are new to this machine, always leave it on, never turn it off. If you turned if off then the print heads may have dried up a bit. I have had mine for over 4 years and never have turned it off on purpose.

print heads? I have both a 25500 and a 360, The only time I had issues with the 25500 was due to the print heads. Clean or replace according the the manual. For $25 call HP, and they will help you for a week on that problem.

solved About 5 years ago, we switched our phones to voip, and were able to add a phone tree. So when you call our shop, it says press 1 for customer service, or if you are a vendor or want to be a vendor press 9. Pressing 9 will get them this message, " thank you for your interest in being...

ouch, not helping here. I am a bit of a newbe, here, sounds like I should have gone with a different machine. I just opened this up on Friday, so I don't even know if it has a tension bar. Our hope is can laminate rolls of material. For training, it looks like I am dependent on this forum...

Is this standard now? If so what is the procedure to use it? There is nothing in the user manual, that did not come with it or on the web site.

I got rid of most of the bowing by using 5 year material. Some of the really cheap material, even had S'ing issues.

In Seattle we used to buy these from our local paper vendor, West Coast paper. We also could buy wires to tie to them. We would imprint them on our small offset press. I think they still sell them.

This may not help, I have a 25500 and use 54" x 165' Sihl 3686, I have always had a problem with head strikes, until I turned up the vacuum to around 40lbs.

backups Bitter pill to hear, Backups must be Automatic and Unattended. You should also do backup audits once a month. I just installed the dropbox app to my phone, and will check the backups when I am waiting around for something. Also never store important data your local drive...

Have you called HP? They will give you a week of phone support for $35 per issue. I wonder if the ink line is a little clogged up. Let us know if you figure it out.

I have found leaving the printer on, in sleep mode, so the heads will not dry out so fast. Also the hp tech support is great, I think for $35 they will help you for a week on a given problem. Last summer they told me to change the sleep mode settings to like a hour? Ours has been a...

I normally just print direct to the hp800ps through the postscript driver. I have onyx10, but never thought to even print through it. I only use the hp800 for simple files or vector. I have noticed that pdfs created in windows 8 give me goofy results. Like some text not printing, errr, so...

how many washes are sublimation shirts rated for? At what point do these start to fade?

Between the support techs from Graphtec and Onyx here is how I set up my cutter. 1. Set the network setting to to DHCP, normally I don't do this. 2. I am letting the software send the settings, vs manual., the cutter seems to capture the software settings. 3. You have to pre position the...

I have the FS8000, and just tried to upgrade our Onyx rip to 10.2. from 10.0. After 3 down days, and 2 hours with both onyx and graphtec tech support, I am at a standstill. I keep getting the error 4011 and it is offscale. Prior to that it ran ok for the last 18 months. We are using a pdf work...

I have the FS8000, and just tried to upgrade our Onyx rip to 10.2. from 10.0. After 3 down days, and 2 hours with both onyx and graphtec tech support, I am at a standstill. I keep getting the error 4011 and it is offscale. Prior to that it ran ok for the last 18 months. We are using a pdf...

Is any one running the fc8000 with onyx 10.2? I am printing to a hp 25500. I am attempting to reload the rip on 2 different machines. I have spent about 2 hours talking to both onyx and graphtec, they are not sure what the problem is.

I just upgraded Onyx to 10.2, and Now I get this error. I called onyx, and they remoted in and found all my setting were correct. He had me reset the machine, and no difference. Also be sure to change from metric to inches if you do that. The firmware is 2.7. There seems to be very little...